Search results

  1. S

    Evinrude 9.5 how long until thermostat opens

    Pretty quick...couple of minutes maybe Invest in one of these.
  2. S

    Evinrude 35hp +/-1980 missfire at higher rpm (lower cylinder)?

    You said you saw exhaust out the water hole (TT) Exhaust should not come out there. Also, head does not look good to me. Pictures are before you cleaned the up I take it. You need to clean, inspect/flatten and reinstall a new gasket. Do you know how to resurface a head?
  3. S

    Power Head Swap? J70PLSSD to J70TLECB

    Isn't one a tiller and the other is not? Anyhow, might be easier to fix the steering. Is it all salted up?
  4. S

    Troubleshooting 1999 Johnson 225 HO

    Well the beep...beep...beep is the fuel oil side. Is the oil tank for the vro still on board?
  5. S

    Shift rod bent ?

    Picture of existing?
  6. S

    1974 evinrude 50 lark help needed

    Drive shaft stuck?
  7. S

    1993 4HP Johnson

    H Here is my 4 hp.....
  8. S

    What is this hole

    Normal. Exhaust/water hole leaking years of oil residue that you loosened up with the seafoam you probably didn't need.
  9. S

    Evinrude 35hp +/-1980 missfire at higher rpm (lower cylinder)?

    Never did a compression check? Steam.... exhaust out TT? blown head gasket maybe?
  10. S

    Troubleshooting 1999 Johnson 225 HO

    Wouldn't that be something if you were like 6 blocks away!
  11. S

    1995 40hp Evinrude outboard motor...No spark!

    Post model number
  12. S

    Inboard fuel tank clogged filters and pickup tube

    There is no miracle fuel additive that will fix it. If it was done before and you still have a problem than that points even more to replacing it. It's either your tank is decomposing or you are buying fuel that is no good. How big is the tank and it's aluminum I take it?
  13. S

    Troubleshooting 1999 Johnson 225 HO

    Racerone is from Ontario....just drag it over to his house. He's like the Yoda of outboards!
  14. S

    Troubleshooting 1999 Johnson 225 HO

    Yeah, that's the normal routine.
  15. S

    1996 Evinrude 25hp E25REDA

    Your sure that was the kill wire right? Almost sounds like a intermittent kill switch. Weird how it won't just die on its own.
  16. S

    1996 Evinrude 25hp E25REDA

    Well people complain of that senario and change it out with success so.....I guess so. Never happened to me. Racerone said 9 out of 10 times that's it....so I hope so. Coils under the flywheel can do it, bad wires..... I'm just hoping your not flooding it or something but if you have no spark...
  17. S

    Troubleshooting 1999 Johnson 225 HO

    I forgot to add the intermittent beep is the vro/fuel side.
  18. S

    Troubleshooting 1999 Johnson 225 HO

    Not to sound condescending here, but you did put pre-mix fuel in it? 90psi....she's had plenty of use.
  19. S

    1996 Evinrude 25hp E25REDA

    The primer knob is working correctly if you feel some resistance when using. It will not need 5 pull/pushes. Once the engine is warm don't use it. That said, you must be diligent looking for cracked or broken wires. Under the mag plate and such. Could be your power pack is heating up and...
  20. S

    Engine dies

    When it does it try pumping the primer ball....if that keeps it running then points to fuel pump. Otherwise, you need to address Racerone's questions.
Top