Search results

  1. F

    1977 Johnson 35hp outboard

    I have a Johnson 35 hp motor on my boat...I'd like to replace the electric choke solenoid... Can anyone give me the part number for a replacement? Also?...Does anyone know if the neutral start switch can be cleaned or does it need to be completely replaced when it fails?
  2. F

    Clymer/Johnson manuals?

    I just spoke to an old timer at my coffee shop...He claims he has the Clymer Johnson manual for my motor. A 1977 Johnson 35hp electric start w/CD2 flywheel and ignition. Are the Clymer Johnson manuals the correct manuals to help me get some repairs done on my motor or are these the aftermarket...
  3. F

    1977 35hp Johnson?Serial# 35ELL77h....Bucking/Misfiring

    I?ve been trouble shooting some issues for some time now with my motor. It runs strong!!! The issue I?m having is with it bucking/misfiring at certain intervals running through its cycle from slow idle-to wide open throttle. Initially I wasn?t aware that the CD2 motor was a coil and sensor motor...
  4. F

    1984 16 foot Lund... Utility restoration

    Just bought a new boat. It's a 1984 16' aluminum Lund with a 1977 35 HP Johnson. I believe it's a pro angler from that era, but the title isn't specific. It took me 3 days to get the motor running because the neutral start switch was faulty. Now I have the issue rectified and it runs and idles...
  5. F

    Mix Ratio

    Can anyone suggest the appropriate mix ratio for a 1977 Johnson 35 HP motor?.....It's 2 cylinder.
  6. F

    Johnson 35 HP wiring question....

    I bought an 1988 16' lund fishing boat. It needs some sprucing up, but I'm on top of it. Got it on the cheap....Really cheap!!! He was an older retired fella that used it everyday...He'd won a walleye tourney up here in Wisconsin and his prize was a new Lund 18"....So I got it for less than...
  7. F

    14 Ft MirroCraft Project.........

    Re: 14 Ft MirroCraft Project......... What!!!!........More pixture's Trailer.....w/fresh coat of paint, bunk boards, brake lights and side running lights.
  8. F

    14 Ft MirroCraft Project.........

    Re: 14 Ft MirroCraft Project......... I got her flipped right side up this afternoon......Here's some pictures of her back on the trailer. Only one issue........The glue holding the carpeting to the seats came loose in some places while she was belly up. I may use some thin aluminum strapping...
  9. F

    14 Ft MirroCraft Project.........

    Re: 14 Ft MirroCraft Project......... This is a photo of my Mirrocraft side emblem which cracked and finally broke apart when I took it off the boat. I cleaned both emblem's with "Simple Green" then re-attached the broken edge w/ca glue, but there was a small chip missing from one of the...
  10. F

    14 Ft MirroCraft Project.........

    Re: 14 Ft MirroCraft Project......... Fresh new paint........Wow!!!.........I'm really impressed at how well my paint went on. I primed on the 31st and today was the first day I could wet sand. Took me roughly three hours. Then another hour to wipe her all down w/warm soap and water until...
  11. F

    14 Ft MirroCraft Project.........

    Re: 14 Ft MirroCraft Project......... I'm interested in finding a product that would allow me to make repairs to my Mirrocraft side plate/emblem before I paint it........I'm wondering if a little JBweld would do the trick...or is there an epoxy putty out there that would allow me to scrape out...
  12. F

    14 Ft MirroCraft Project.........

    Re: 14 Ft MirroCraft Project......... Well.....I got her all primed and ready for paint. Minus wet sanding. I just didn't want to go through with it. So......I hope it doesn't come back to bight me in the butt. All told......It's not a restoration. Just a spruce-up. Non the less I'm trying...
  13. F

    14 Ft MirroCraft Project.........

    Re: 14 Ft MirroCraft Project......... Well.......The nameplate was cracked when I drilled out the rivets holding it in. Just years of weather, I'd assume. I'm wondering if it will be salvageable, or if I can find vintage replacements. Also I'm wondering if this boat is the same as a 14'...
  14. F

    14 Ft MirroCraft Project.........

    Hey all..........I'm new here and I've been lurking for a couple of weeks. Last month I bought a 30 "some" year old MirroCraft 14 ft project boat. Truth is.....I've needed a small fishing boat for a long time now. I'm from the mid-west and thought it was time I explore some of the lakes and...
Top