Search results

  1. V

    1990 Johnson 140 does not start

    I've tried to start the motor for my father in law who is not able to take care of it anymore. The motor last ran like 9 month ago therefore I used starter fluid, spraying it into the air silencer as well as into the cylinder as well. The moter would turn, but not fire at all. Checking the spark...
  2. V

    '96 200 hp Johnson carbs replacement

    Does anybody know, if the carbs of a '96 200 hp Johnson could be easily replaced with the carbs of a 93' 225? Thx
  3. V

    Johnson 200 carb replacement

    Does anybody know, if the carbs of a '96 200 hp Johnson could be easily replaced with the carbs of a 93' 225? Thx
  4. V

    '97 Johnson 200 runs, but doesn't accelerate in gear

    Last weekend we took the boat out into the sound, tubing with my nieces. I am glad that I didn't go out fishing that day as I would have had trouble coming back. After an afternoon of tubing going back to the dock the motor would not rev or accelerate; even with wide open throttle the motor was...
  5. V

    Small metal particles on lower unit drain plug

    '97 Johnson 200 hp Oceanrunner: I change the lower unit oil about twice a year. Every time when I remove the lower unit plug there would be a lot of small metal particles sticking to the plug, almost as a 'metal dust'. Motor is running fine and I never noticed any noices from the lower unit...
  6. V

    Water Pump on Evinrude 200 HP

    I got an Evinrude 200 hp ('93, Serial No Q02614230). Last week end while running the motor on a flushing device I notice a lot of water coming out on the lower unit where the unit is bewing bolted on. The water pump indicater stream was barely coming out sometime water was just tripping out. A...
  7. V

    Power trim for 40 hp Evinrude

    Last year we purchased an used 13' BW ('73) with a late '80 Evinrude 40 hp. We used the boat extensively in the sounds, which means we always needed to look out for shallow waters. We would like to add a power trim, so we are able to maneuver over shallows more easily. Also my wife is not able...
  8. V

    Upgrade Evinrude 200 to 225

    Does anybody know if an evinrude 200 be easily upgraded to 225 hp. Both models have the same block. The additional horses must come out of the the mixture/carb.<br /><br />Have a '93 Evinrude 200 TX (Q02614230).
  9. V

    Damaged prop hub

    I have a damaged prop hub. I was able to change to the spare prop, but now it seems I can't find a shop to prepair the hub. How difficult is it to change the hub myself?<br /><br />This is a SS for an Envinrude 200 (1993).
  10. V

    Evinrude E200 TX does not start

    My 93 Evinrude 200 TX (Q02614230) does not start. Over the last weeks / month it was hard to cold start, but once the moter started, it would start again without a problem. However last week end I put the boat in the water, cranked the motor, but it did not start at all. The flywheel turned, the...
Top