Search results

  1. J

    Warning horn not getting ground

    It doesn't tell me anything I'd want to know. For instance, which pins of the ECU receive the oil pressure and water temperature signals, and which one activates the ground on the horn.
  2. J

    Warning horn not getting ground

    Sure, but first I need to know where it goes. The signals coming from the oil pressure switch, and from the engine temperature switch, are supposed to go through the ECU which in turn activates the horn. So far I'm not able to figure out which ECU pins are involved.
  3. J

    Warning horn not getting ground

    yes of course. The issue is that the path from the sensor wire to the dashboard is all hidden in harnesses. I can't figure out how to access a midpoint. There's probably one at the ECU though. If I manage to find it, I might be able to tell if the lack of continuity is before, after, or in the...
  4. J

    Warning horn not getting ground

    Thank you, but it doesn't look relevant.
  5. J

    Warning horn not getting ground

    Everything is inside harnesses that I'm reluctant to open up. I can't find a schematic detailed enough to help. Do you have one?
  6. J

    Warning horn not getting ground

    Well i grounded them both, the sensor still attached to the wire. But even just grounding the wire does not activate the ground at the helm. Any advice?
  7. J

    Not receiving emails

    Hi, I do not get notified when someone answers my posts. I checked my settings, all notifications are ON. It seems like the /contact form does not exist either. How can I get ahold of an admin?
  8. J

    Warning horn not getting ground

    Can you share more about these connectors? It's impossible to follow the wires through the harnesses.
  9. J

    Warning horn not getting ground

    That's exactly what I did in the first place. But ground does not arrive at the horn.
  10. J

    Warning horn not getting ground

    I have a 1994 OMC Cobra Ford 5.0 Engine. The warning horn does not work, whether when I turn the ignition on, or when I simulate a failure by grounding the oil pressure switch. It gets +12V through the purple wire, but not -12V through the tan wire. Where should I look next?
  11. J

    Replacement Trim Hydraulic Pump for OMC Sterndrive

    Thank you everyone. I ended up purchasing a used pump on eBay. It works great.
  12. J

    Replacement Trim Hydraulic Pump for OMC Sterndrive

    Hi, I have a 1994 OMC Cobra Stern Drive model number 50FACPMDA. The tilt/trim hydraulic pump model number 985846 is likely faulty. Since it's no longer made, what can it be replaced with? Thank you Jeanric
Top