Search results

  1. alldodge

    !/2 ton Truck towing limitations

    ^^ And there we go down a new rabbit hole
  2. alldodge

    mercruiser 4.3 thermostat housing

    Yes, that one It should work just fine. If it screws on it will work
  3. alldodge

    Sunray SV restoration.

    Welcome Your HIN has to many digits and should have another letter First 3 manufacture next 5 serial number Next 2 digits is month Next 2 digits is boats model year So model year is 1979 Don't know what the last 2 digits are Edit: looks like it is June
  4. alldodge

    8.2 Mercruiser Mag strange error at specific RPM, code 61

    Thanks for closing the loop on this. Sure is amazing that there wasn't a low water pressure error showing up
  5. alldodge

    2002 5,7 Mercruiser exhaust manifold keeps cracking - 5 times this summer

    I'm at a loss, and I would think about removing the single/three point drain and change to the seven point. Changing to seven point would get rid of the check balls and replace them with 90* elbows https://www.mercruiserparts.com/bam/subassembly/31961/8093/210
  6. alldodge

    mercruiser 4.3 thermostat housing

    Place intake gaskets in place, then put a bead of the black RTV starting on top the intake gasket about 1/2 inch. Run bead across and up on the other gasket about 1/2 inch. Don't get any sealer in the oil sending unit hole on the rear
  7. alldodge

    Possible dumb newbie question

    No, your good
  8. alldodge

    mercruiser 4.3 thermostat housing

    The marine gasket set would not have those items in it, because salt water woukd eat them up in no time. Not knowing more info I would suggest not using them
  9. alldodge

    Commander classic shifter issues

    Welcome Sure can use any which indicate Mercruiser/Mercury control Yours being a 1987 there may need to replace the cables to use 3000 or 4000.
  10. alldodge

    Exhaust Boots Install

    I only use soap, using lube might cause it to leak later
  11. alldodge

    Verado 5.44 Pinion height tool

    Great news, hope it works out
  12. alldodge

    mercruiser 4.3 thermostat housing

    I don't know Hey @Scott Danforth you have an idea what those are?
  13. alldodge

    Mercruiser bearing carrier tool

    Not sure that puller will work to pull a gimbal bearing. First use lower holes May need something to apply pressure the keep fingers separated. Then also need to have bolt able to press against something fixed
  14. alldodge

    1988 Rogue 2420

    At least your impeller is easier to change
  15. alldodge

    mercruiser 4.3 thermostat housing

    Would use full flow Gasket
  16. alldodge

    mercruiser 4.3 thermostat housing

    Only think needed is different gaskets between manifold and elbow. The LX used what was called warm manifolds and more cold water would flow out the elbow. The EFI changes so any water not used to cool motor goes out thru the mans then out the elbows
  17. alldodge

    !/2 ton Truck towing limitations

    Don't think we have any attorney's here, and since a F150, 250 and 350 all have the same body, and differences come from chassis changes. So IMO as a non-attorney the little placard is not the final say. If things are changed to increase tow capacity, axle, springs, brakes, steering, etc, then...
  18. alldodge

    mercruiser 4.3 thermostat housing

    Welcome Use all the components from the EFI on the LX. Use same exhaust manifolds and hoses. Don't use the older style
  19. alldodge

    Verado 5.44 Pinion height tool

    Welcome Don't see how even if someone had the tool could get you all the measurements. I have the Bravo pinion tool 91-60526T and the parts are welded together.
  20. alldodge

    1925 Remington model 12 refurb

    Looks great
Top