Search results

  1. silverbul

    Sound deadening

    cut to fit all flat parts of the doghouse and fill as needed. these hangers are what i would use. stickey back or you could use jb weld to adhere. JMO. boat does not always mean break out another thousand.
  2. silverbul

    Sound deadening

    why not just go to the local hardware store and get a sheet of that pink board insulation, easy to cut, pretty cheap and i'm pretty sure the melting point is well over 400 f but you might want to check on that. jmo
  3. silverbul

    Something in my eye.

    Im poor, could only afford 2600. lol
  4. silverbul

    Something in my eye.

    I just couldn't see spending 100+ on a transom riser soooo this is what it is. Finishing work left to do. 14 foot jonboat with a suzuki dt8. Total cost, 19. Sorry, im poor.
  5. silverbul

    Fuse Panel Setup 89 Islander

    unplug 1 at a time, see what doesnt work and label. jmo
  6. silverbul

    Easier time putting on the trailer

    I will never, ever again gripe about loading my teeny weeny 14 foot jon boat again. lol
  7. silverbul

    contraptions

    You mean you welded them? lol My dad said, don't worry gravity will take care of it. lmao
  8. silverbul

    contraptions

    Glad to see this, shows me i'm not as crazy as my wife thinks. lol At least there are two of us. Maybe you would remember back in the day we would chop off a set of front forks off a perfectly good bike just to add to another for the chopper effect. lol
  9. silverbul

    Easier time putting on the trailer

    Or you can just deal with it. i'm in the same BOAT. ( get it )
  10. silverbul

    How to tow a 9.9 Johnson

    after looking at the pic, i don't know how your going to put a transom saver on there, but i will ask, isn't the license plate supposed to be under a light?
  11. silverbul

    How to tow a 9.9 Johnson

    I just put all the motor weight on the transom saver as not to stress the transom at all. you will know more about your application than me. jmo
  12. silverbul

    How to tow a 9.9 Johnson

    btw, you can get the bracket that goes on the trailer that allowes the transom saver to move up or down.
  13. silverbul

    How to tow a 9.9 Johnson

    I pretty much have the same setup and a transom saver is the way to go. jmo
  14. silverbul

    Volvo Penta AQ131D getting hot

    imagine your hand scooping the water compared to pushing. those three vanes are scooping away the water than pushing the water. watch what happens with a new one. jmo
  15. silverbul

    Volvo Penta AQ131D getting hot

    i still think your impeller is 90 percent of your problem. jmo
  16. silverbul

    Volvo Penta AQ131D getting hot

    look at the vanes on the impeller, looks like some were running backwards. jmo impeller is toast.
  17. silverbul

    raising motor on jon boat

    i have a 14 foot jon boat flat bottom with a suzuki dt 8 on it. the cavitation plate is 2 inches below the bottom of the hull. would it be to my benifit to raise it so its even with the hull. boat runs a little nose high and doesn't really plane but pushes the boat pretty good. i know about the...
  18. silverbul

    Got electrocuted when touching cylinder?

    July 24th, 1968 at 2:26 pm. wednesday. Haven't been the same since. lol
  19. silverbul

    Got electrocuted when touching cylinder?

    Did you know my older brother? lol
  20. silverbul

    Got electrocuted when touching cylinder?

    You know what the doctor says, if it hurts when you do that, don't do that. lol
Top