Search results

  1. cptbill

    Smoke Free, Day 2,572

    I quit back in 94, didn't really find it all that tough but everyone is different so good luck and congrats to all that are trying
  2. cptbill

    How too test if PU coil is weak ?

    If your checking for an intermittent PU coil try removing the cap and rotor then then check the green wire and white wire at the coil to make sure there solidly attached then check for corrosion where it plugs into the module
  3. cptbill

    Home Renovations - Weather Permitting

    There is a new school of thought out there that says seal every thing in tight and make the attic it's own weather tight space. Seams there are a lot of builders that are doing it that way now. I'm still kind of old school when it come to venting the roof but if yours is already some what...
  4. cptbill

    Diningroom table - with epoxy?

    Well, that came out pretty nice
  5. cptbill

    Square grouper and stuff

    Haven't over here on the Gulf side but I would guess the with the current flowing the way it does(Gulf Stream) and the proximity of Cuba, Dominican Republic and others that the south FL area would be more likely to have that happen. Just my opinion
  6. cptbill

    Home Renovations - Weather Permitting

    Nice Job! looks good (y)
  7. cptbill

    Engine won’t turn over

    Typically, if you get some movement but not a full rotation I would think you should be looking at connecting rods or a valve that has broken(or valve spring)
  8. cptbill

    Scotch Guard on Sunbrella

    Thanks All, the sunbrella web site says 303 marine so if I every get it clean i'll use that but I wonder what the difference is between the reg. 303 and the marine? The reg. stuff is about half the cost of the marine.
  9. cptbill

    Scotch Guard on Sunbrella

    Has anybody ever put Scotch type stuff on there Bimini to help make the stains a littel easer to get off? I know they make stuff for patio furniture to help make it easer to clean but I just wondered if anyone has tried it, mean time I'll go to the Sunbrella site and see what they have to say
  10. cptbill

    Not what was expected....

    That has all the makings of an expensive day
  11. cptbill

    Clearing salt build up from block

    I have also heard that vinegar dose a good job of getting rid of salt build up, might try a good vinegar flush this winter
  12. cptbill

    electric outboard, 350 Hp

    Won't be long and they'll have a solar charger for it
  13. cptbill

    belt squeal / chirping noise

    2006 Yamaha LF250TXR 4 stroke. My 250 Yamaha has developed a chirping noise, if this was my Larson I would know that it was the power steering belt but the Yamaha has no belt s except for the timing belt. This is my first outboard boat so I don't really have a clue. Anyone have this issue before?
  14. cptbill

    Which New Boat

    Depends on the depth of the water you like to fish and what else you plan to do with it, I would think that "toons" would work fine for the rivers but it's what you like not what I think
  15. cptbill

    Tankless Hot Water Heater Recommendation

    I have an "eco smart" tankless unit that I installed about 5 years ago and it works great and was a lot less then then most of the other brands(got it at the depot) 2 full baths, outside shower, kitchen w/dish washer and laundry no issues at all. My brother has had his eco smart unit all most 10...
  16. cptbill

    Thank You Veterans

    With a son in law in the navy and Chief engineer on a sub I would like to truly that every one that has served or is serving and I would also like to thank there families that make there service possible
  17. cptbill

    Diningroom table - with epoxy?

    Table top epoxy is the way to go on that project, makes for a great glossy finish and will even out the surface over the imperfections. Make sure your project is level and the temp is warm enough to let it flow and keep a heat gun handy. Here's the last one I did with epoxy not very big but the...
  18. cptbill

    Attaching PWC float to Permanent Dock

    Took a pic of the jet ski dock attachment
  19. cptbill

    Attaching PWC float to Permanent Dock

    You already have the holes in the floating dock why don't you just drive some poles through the right next to the dock. They also make theses thing that are kind of a squire U shape that bolt onto floating docks and go down through the holes in your float, my across the canal neighbor attached...
Top