in addition to all the tips above
my old Avanti fuel fill line inner wall failed and acted as a flap valve. the only solution was to replace the 2' of hose
https://forums.iboats.com/threads/must-have-technical-information-for-diyers.335378/
https://forums.iboats.com/threads/miscellaneous-mercruiser-information.323278/
look in these links for the special tools.
you will be pulling the bearing carrier
First , welcome aboard
Next, reach out to Taylor Made.
https://www.taylormadeproducts.com/windshield-glass-solutions/
Make sure you are sitting when you get the quote
I managed to get 5 years of salt use with a painted trailer. rinsed the trailer with salt-away every time. however after 5 years, anything that was supposed to roll.......didnt.
Upholstery will need attention. after 2004, the threads, vinyl and foam no longer carry arsenic as the...
your idle circuit is plugged
time to pull the carb apart. soak in a tub of berrymans, run a piece of mono thru each passage to ensure they are clean, re-assemble and set idle mix and speed
if you notice, I stated to change the trans, you dont need a reverse rotation motor. both standard rotation motors, one prop turns right, one prop turns left.
first, welcome aboard
the question depends on what level of wrench turning skills you have
you can buy the kit from Mercruiser. its complete and its pricy and it mounts the filter to the exhaust
you can buy the parts and make your own kit for about $120 and mount your filter anywhere
that...
You should be pulling the fuel filter every fall and swapping it. A light coat of grease will keep it from sticking
Check your oil pressure. No oil pressure, no fuel pump and you will get alarms
