Search results

  1. Scott Danforth

    Oil in bellows

    It's gear oil and water mixed
  2. Scott Danforth

    MerCruiser 5.0 MPI diagnostic connector

    Boat motors do not use the automotive ALDL connector or OBD software You will need Rinda software Many things can be diagnosed easy without plugging in. What is the motor doing or not doing?
  3. Scott Danforth

    5.7GXI age/value

    factory serial number on spark arrestor cover will bring you back to the factory engine. check the side of the block for a builders tag if its a reman or the serial number tag on the block next to the starter
  4. Scott Danforth

    1997 PCM PLD 5.8L parts

    If you cant get prestolite parts, you can always change to a mallory dizzy.
  5. Scott Danforth

    Can anyone identify this model ANGLER?

    what does the paperwork (title and registration) say it is?
  6. Scott Danforth

    Oil in bellows

    pressure test the drive. most likely the input seal is bad
  7. Scott Danforth

    Compatible OMC Serv Manuals

    that is the publisher site. they are the ones writing and publishing the OMC/Johnson/Evinrude manuals.
  8. Scott Danforth

    1984 starcraft islander

    If you can get a ratchet strap around one end, you can put tension on it
  9. Scott Danforth

    Compatible OMC Serv Manuals

    Only legal place to get the manual is from the local dealer, www.outboardbooks.com, or used ones from ebay
  10. Scott Danforth

    Lost gearage?

    The cost of the required tools, equipment, parts, manuals would be more expensive than a brand new drive from Mercruiser. Or 2 drives from SEI
  11. Scott Danforth

    1986 hydrasport

    On a 37 year old boat, I would do it when you do the deck, stringers, and transom
  12. Scott Danforth

    Need help with plugs selection

    Marine plugs have nickel plating
  13. Scott Danforth

    Four Winns Color Codes

    Gel changes color in the sun. After 3 decades any patch will look like a patch. Even if you perfectly match it today, in a month it will be visible as the new gel will change at a different rate than the old gel unless you redo the whole thing
  14. Scott Danforth

    Damaged corner of swim platform - how to repair?

    Bandaid may work for a few months. However my guess is the core of the platform is rotten which is why it failed where it did
  15. Scott Danforth

    Bent steering cable on motor

    And if you can't get it out, a new tilt tube is under $100
  16. Scott Danforth

    What are these tiny bubbles??

    Welcome to every fiberglass boat older than 15 years
  17. Scott Danforth

    Bent steering cable on motor

    Keep trying Worst case, buy a new tilt tube
  18. Scott Danforth

    87 liberator motor mount/stringers

    how are the bulkheads and transom?
  19. Scott Danforth

    RE: Issues with Mercruiser 5.0 LX 4 Barrel Carb

    You have a core motor. You can either get your motor rebuilt, trade it in as a core for a new long block. However with compression that low you are down on power
Top