FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
In Other News . . .
You will notice a few enchancements to the forums to make your experience better. These include: Email Notifications, Thread Previews, Thread Starter Notation, and Emoji Options on the 'Like' icon. . .
Additionally, the merchant portions of the website have been updated and are now operational. . . . Check out iBoats for all your boating gear.
I have a 2005 f150 I started it fine it ran for a bit then cut out. It was not turning over or even any ptt. I checked all the fuses the are fine I took a voltage meter and I have battery voltage at the engine. It happened on monday and I disconnected the main harness and she fired up and now...
I have a 125 mercury elpto and it started to run rough. So I took off the cowling to look at the motor. After I took it off I walked back up to the helm and looked back at the motor and seen the two yellow wires coming from the stator were on fire at the bullet connectors right next to the...
I have a 1999 90hp evinrude that i am having high speed issues. It will idle fine and midrange ok but when you go to wot it goes for a few seconds and then starts to sputter and bog down. I put a fuel pressure gauge in between the fuel pump and carbs and the pressure goes from 5psi at idle to...
I have a 04 90hp merc and the rectifier cought on fire.I replaced the ign harness,10 pin engine harness, and rectifier.Is there anything else I need to be replaceing.thank you Todd
