Search results

Certain cars have the ----" see what I can afford "---appeal.-----You can show them off at the mall.----Folks driving next to you on narrow roads.-----Cruise nights.----Bring back memories from yester year ETC.-----Boats are just not the same.

Wrong powerpack ?----Part # on your powerpack?

Yes ----I know that line crews regularly help out.-----I am talking about money / help from overseas.

Is there any " international " help coming to assist in recovery from these hurricane disasters ??

Run with a timing light 1 cylinder at a time.------Observe the light.

It clearly sounds like an ignition issue to me.-----Could be a bad plug or bad plug wire.

Sure it is not the 80 HP model ?

See post #2 on this saga.

The pulse limiter fitting is a ----" flow fuse "----for the VRO housings.------Keeps the pump from becoming a small bomb should there be high airflow / pressure spike from the crankcase.

Run fuel out of the carburetors before putting boat on the trailer.----No spillage.-----And empty carburetors stay clean.

The VRO gasoline / oil mixing pump looks and sounds complicated.----It is a simple device.----Take it apart for inspection !

And why would the 35 HP blocks not interchange / fit ?

Lots of mis-information on compression in 2 strokes.----see post #23 and #38.

The screen is all you need.-----Thousands of motors running fine with just that screen / filter in the pump inlet cover.

Are there ----" commercial "--- models that use a different gearcase.------Those often have a W in the model number.-----Did you look at the 1985 model year ?

Or was it 1985 for the thru hub for the 25 HP ?

A 1953 model , or 73 , 83 . 97 or 2004 model ?----Does spark jump a gap of 5/16" or more on all leads ?-----Post the actual compression test values.

Does spark jump a gap of at least 3/8" on both leads ?-----Post the actual compression test values.

???----To me it looks the bulkhead was cut out.-----Left over fiberglass tabbing is clearly visible.-----It was not repaired the be the same ( or better ) than when it left the factory.

The 4th picture shows repair work .----But seems the bulkhead was not replaced and the same as original.-----In the GTA area ???