Search results

  1. R

    1987 Four Winns Boat 16ft inboard would you Buy?

    The boat that I am doing had the bow eye bolted through a piece of wood.------It now has 2 bow eyes in place with " non rotting " material.------I regularly visit a place where the yard is littered with boats.-----Fortunately the former owners listened to the advice when they were told.-----"...
  2. R

    cooling johnson / evinrude 9.9 /15 fourstroke 1998

    Those use the same lower unit as their 2 strokes.-----Treid and proven water pumps.----Have to ask.-----Water is 15 cm above the impeller when testing?
  3. R

    1987 Four Winns Boat 16ft inboard would you Buy?

    Motors and drives are easy to repair.-----Rotten plywood cores not so much.
  4. R

    60 hp Johnson won’t idle

    Post the compression numbers on that 50 year old motor.----Set the low speed needles at 5/8th turn out.---Is thermostat in place and working ?------Put boat in water and do final adjusting of low speed mixture.-----You should also install a new water pump impeller now.
  5. R

    Transom assembly rebuild

    Fresh water / short season is even a better choice.
  6. R

    Transom assembly rebuild

    Try-----king's propeller repair---Ontario , Canada---Good freshwater used might be available.
  7. R

    Visited the Atlantic City Boat Show today

    New boats are just like new cars / trucks / EV's / houses.------All out of my snack bracket
  8. R

    60 hp Johnson won’t idle

    1964 ?----1970 ?----1985 ?----1988 ?---1995 ?----They are not all the same.
  9. R

    70 4 hp Evinrude recoil

    That gentleman has videos where he tries to remove the tapered dowel on OMC motors.-----Drives them in the wrong direction.-----For entertainment purposes only !!!
  10. R

    Shift rod height for a Frankenstein Evinrude

    Try 21-1/4" for your motor.----Are you aware of how to measure this ??
  11. R

    Shift rod height for a Frankenstein Evinrude

    Why would you want to use a 70 HP dimension on your 90 HP.-----Just post your model # or describe your engine.-----Is it a 60 degree carbureted ?
  12. R

    Shift rod Spec

    ??---Well there are 2 different 90 HP models !----So you need to post the model # to get the correct measurement !
  13. R

    70hp evinrude pitch size advice

    A 49 or 56 cubic inch model ?----Model # is ?
  14. R

    Boggs down

    Your mobile mechanic should have no trouble figuring this out.-----But test run with another tank and hose.----Test run with a timing light one cylinder at a time out on the lake.----See if you are losing spark.-----Checked the flywheel key ?----Any sign of water on the plugs ?
  15. R

    Advice needed 1977 evinrude 35 hp

    Post picture of / explain condition of this old impeller.----This is always interesting to me.
  16. R

    Stupid shake-down cruise? Lake Ontario

    True story.-----One time the police were running down the dock to their boat.------Folks told them that I was already 1/2 to the location of the emergency.-----Turns out the overturned canoe was able to get out of trouble by themselves.----Other time folks said----" if we were in trouble , we...
  17. R

    Advice needed 1977 evinrude 35 hp

    The motor may well have sat for 30 years.----At any rate most motors should have a new impeller every 5 years.
  18. R

    60hp vs 75hp for 160ss

    Get the correct prop for the 3 cylinder OMC.----Try a 15" pitch if it bogs with a 17" pitch.
  19. R

    Stupid shake-down cruise? Lake Ontario

    You will need a ----" cold beer to warm up your hands "----on a trip like that.
  20. R

    Battery Options

    Why 24 volt ??----What voltage is the system on the Mercury ?
Top