Search results

  1. B

    through the hull transducerp

    Has anybody used a thru the hull transducer in an alum boat? If so how well did it work? Also, best placement: front, middle, or back of boat?
  2. B

    tilt and trim issue

    Hey guys, I have a 1979 70hp Johnson, the last 4 times out my tilt and trim works fine until I try to load the boat on the trailer, at that point it wont go up. I have to get in the water and open the relieve valve and lift it by hand. The solenoid is working, could it be that water is slowly...
  3. B

    20hp Chrysler

    Hello guys, I did some trading and ended up with a Chrysler 20hp model 2001 serial 3886. The top piston has little or no compression even though the fella told me it ran GREAT when he parked it 5 yrs ago. Hoping that the rings are stuck I poured 30 wt. oil in each cyl. to maybe break the rings...
  4. B

    1966 chysler 9.2 hp wiring

    hey guys, just bought a 1966 9.2 hp chysler and the starter solenoid has been disconnected. Anybody know where the wires go? I know one big post gets direct from battery, other big post goes to starter. There is a red wire that I think also goes to a big post (not sure) then the solenoid has a...
  5. B

    Two wire tach for 70hp johnson

    Hey guy's, I have a 1979 70hp johnson. I want to add a two wire tach (which I already have) I know the black wire is ground but I have no idea where the other wire goes. Help please!
  6. B

    sticking starter

    The starter on my 1979 70hp johnson stays engaged after the motor starts. I can shut the motor off and tap on the starter gear while rocking the fly wheel back and forth and it will finally drop back down to try to start it again. I have to do this 4 or 5 times before I can get it started...
  7. B

    overpowering???

    Hello all, this is my first time on here so be kind!! I have a 14 foot astroglass fish and ski trihull. It is rated for a 60 hp, I put a 70hp johnson on it. Do any of you see any issues with this?
Top