Search results

  1. I

    1998 evinrude 225 ocean pro help #2!

    New leg didn't change anything, i think the motor is backfiring and spinning backwards
  2. I

    1998 evinrude 225 ocean pro help #2!

    It was a whole new kit I installed, and it was also doing this before I even took the leg off that's why I thought timing change the impeller, but it has new housing and new gromet and o rings Tomorrow im going to try a different leg from a parts motor I have to see if it makes any difference,
  3. I

    1998 evinrude 225 ocean pro help #2!

    I was able to run the engine with the leg off and and a hose hooked up to the pickup and water came out while it ran, but it won't pump with the leg on, new impeller and I can't figure out why
  4. I

    1998 evinrude 225 ocean pro help #2!

    Okay so I back flushed it and I re checked the impeller, all good and flowing, I took the leg off and put a hose onto the intake pipe and was able to get water to pour out the pee hole, so i don't know if it's clogged, I put the leg back on and same thing I start it up it spits and then stops
  5. I

    1998 evinrude 225 ocean pro help #2!

    Prior to this the motor always pushed good with flush muffs, always a steady stream drilling a hole in the ground, water was cold im thinking about trying to flush with vinegar to try and break any cloggs
  6. I

    1998 evinrude 225 ocean pro help #2!

    Hey guys so I got my spark back and the motor is running, but now then problem I'm having is it doesn't want to pee water, When the boat went down it always had a steady stream but now it will pee for 10nseconds then stop when I first try, after it stops it won't spit again unless I let the...
  7. I

    1998 evinrude 225 ocean pro, no spark! Help!

    So I started the motor up, it's running rough backfiring and doesn't want to spit anymore, I got a new impeller for it today. Tomorrow I'm going to swap the impeller and try to mess with it, It ran good before the spark went out and I had to replace the timer base, so I figured it has to do with...
  8. I

    1998 evinrude 225 ocean pro, no spark! Help!

    Well I ended up getting a parts motor and swapped put the timer base and all the spark came back just wanted to let every one know and thank you guys for the help. I'll be out for halibut April 1st
  9. I

    1998 evinrude 225 ocean pro, no spark! Help!

    Okay im going to pick up a proper meter and go at it again with the steps this week hopefully, I will report back with my readings, thank you for the help so far everyone
  10. I

    1998 evinrude 225 ocean pro, no spark! Help!

    The shop told me the trigger output was good but maybe it's not, I took it off and did a resistance test on it and it was within the specs aswell, the stator is brand new aswell It did have quick start im onw to work on it again today, I will try quick start to see if the lights are counting...
  11. I

    1998 evinrude 225 ocean pro, no spark! Help!

    The shop told me the trigger output was good but maybe it's not, I took it off and did a resistance test on it and it was within the specs aswell, the stator is brand new aswell It did have quick start im onw to work on it again today, I will try quick start to see if the lights are counting...
  12. I

    1998 evinrude 225 ocean pro, no spark! Help!

    This is my fly wheel I think the outer and inner magnets look good?
  13. I

    1998 evinrude 225 ocean pro, no spark! Help!

  14. I

    1998 evinrude 225 ocean pro, no spark! Help!

    This is what the shop had done, i should have posted this before, and I don't believe it has optical ignition, im honestly pretty green to all this stuff
  15. I

    1998 evinrude 225 ocean pro, no spark! Help!

    So im hoping to get some help or some insight, I have a 1998 evinrude 225 oceanpro that has a no spark issue, I had it into a shop for the problem They replaced the stator and confirm the stator and trigger was good but said I wasent getting power out of the power pack(CDI) to the coils, I had...
Top