Search results

  1. E

    Johnson 25hp won't start

    Hi there I have a Johnson Model: 25R76E and Serial Number: E4431642, any idea of the Year, Horse Power and what type of sparkplugs should I used.<br />I will really appreciate any Help.<br />Thank you
  2. E

    1994 Evirude 200hp RPM to High

    Hi there, I have an 1994 evinrude 200hp, with ear muff I get 2000 rpm at idle, and when I got to the boat ramp I get 1000 rpm and it idles really good and will never go off, but If I bring the rpm down with the ear muff to a 1000 rpm at idle, when I go to the ramp I get below 200 rpm at idle and...
  3. E

    Evinrude 200hp voltage????

    Hi there, in a 1994 evinrude 200hp. Any idea what’s the Voltage from the power pack to the coil? (I got in DC 2.6V) and from the coil to the spark plugs? I got in DC 2.6V), I'm trying to find out if the coils are bad or the power pack. Motor was running fine until yesterday, didn't start, I...
  4. E

    1994 200hp Evinrude propeller

    I have a 1988 aquasport 222 CC with a 1994 200hp evinrude, the propeller on this motor is 14 1/4 X 19, boat runs 48mhp at 5000 rpm, I also have an extra 14 1/4 X 21, if I replace the propeller with the 21p, my rpm will be higher or lower than 5000 RPM? I think I will gain more speed but how...
  5. E

    1993 Johnson Sailmaster 9.9hp Battery Cables

    Hi, I have a 1993 Electric Start Johnson Sail Master 9.9Hp. Model: J10SELETM, Any Idea where the Battery cables go to? I can see the red wire connected to the starter and to the rectifier, I also see the black Ground wire, I can see all 3 wires until they get to under the carburetor there, it...
  6. E

    1994 200hp Evinrude?????

    Hi, I have a 1994 200hp Evinrude that came with a bad trim motor, I did install a new motor Today, and fill the up with trim fluid, I try to tilt the motor and it will not go up, I can heard the trim motor running, but motor will come up a little bit and that's about it, I check for fluid and...
  7. E

    evinrude 6hp ????

    Hi there, I have an Evinrude 6hp. Model: E6RET8, color: blue. Any idea on what year this is? Also, motor has the Lower Oil plug thread is stripped any way that can be fix or I will have to buy another lower unit?<br /><br />I will really appreciate any help of you part.<br />Thank you
  8. E

    OMC Sea Drive

    I have an OMC Sea Drive <br />Model: 1AALCNF <br />Serial# J735818<br /><br />Any help with year and HP? <br />I will really appreciated <br />thank you
  9. E

    Evinrude HP and Year????

    Hi there, I have 2 Evinrude outboard motors, don't know the year and HP. here are the numbers on the motors: <br /><br />1st: Model: 15504C<br /> Serial# E0004051<br /><br />2nd: Model: 10824M<br /> Serial# E0002518<br /><br />I will really appreciate any help.<br />Thank you
  10. E

    1997 Mariner 4-stokes

    Hi there, any one know how to drain the oil on a 1997 4-strokes Mariner 50hp outboard, model: 50ELPT. I will really appreciate any help.<br />Thank you
  11. E

    1995 mercury compression test

    Hi there, I just received 1995 Mercury 150hp 2.0 Liter, I did a compression test. From left side first and top to bottom:<br /><br />1) 115<br />2) 116<br />3) 0<br />4) 116<br />5) 115<br />6) 115<br /><br />piston number 3 there is no compression at all, you see the piston moving back and...
  12. E

    1976 evinrude 9.9

    Hi, any idea on how can I remove these bolts; I remove the lower unit to change the impeller and broke about 6 of them. I will really appreciate any help.<br />Thank you<br /><br /> <center><br /><img src=http://img.photobucket.com/albums/v11/sportcraft17/Image607.jpg><br /><br /><br /></center>
  13. E

    1976 Johnson 200hp Tach ( RPM) Help!!!!!!!!!

    Hi there, there is no wire coming from control or motor to the tach, the wire I found Gray red and black wore cut, I have dismantle the control so you can see the cables inside I also took some pictures of the 2 tach that I’m using, is there any way to send a cable from the motor to the tach, I...
  14. E

    Johnson 200hp Proppeller

    Hi , I have an 1976 200hp Johnson with a 1976 21 footer Grady-Whites WA, The propeller on the motor is a Aluminum 15 1/2 X 19 I'm doing 45 knots with full load very happy with. I just bough a Stainless Steal Power tech 15 ¼ X 17 any Idea with one should be better…<br />Thank you
  15. E

    1976 200hp Johnson

    Hi there, any ideas on why this motor 1976 200hp Johnson is leaking oil thru the mid section, every time I start up the Motor oil will come out thru the outside top part of the midsection, even if I run the motor for 2 minutes oil will come out. Is that because I have a faulty gasket between the...
  16. E

    1977 Grady White Finally Strip please look at the pictures

    Hi there, I finally strip the floor and start the project, I’m very happy so far, any ideas on what to do with that big space where you see the white cooler, that space has a big round hole to drain the water. I’m loosing all that spot and I would like to do something, I don’t have a fish box...
  17. E

    Evinrude Year????

    Hi, I have a Evinrude don't know year or Horse power. Model: 10555C Serial: E0001003, I will really appreciate any help.<br />Thank you
  18. E

    Nissan 8hp oil ratio????

    Hi, I recently acquire a Nissan 8hp model: NS8B 3B2-1<br /><br />Is there anyway to know the Year and the oil ratio on this Motor?<br />Thank you
  19. E

    walleyehed , Walker, Steve Huminski, fireman57, rodbolt, dolluper , OBJ, RyanMcR

    Hi, I have a Johnson 200hp model: 200TL76S, I have install new sparks plugs, De-Carb. new coils, rectifier, I have sparks in all cylinder, compression is good but the motor is still miss firing, I'm only getting about 2000 rpm at full throttle, but I can go anywhere at idle speed, motor start...
  20. E

    Grady White with 200hp

    Hi, I have a 20 footer Grady-White overnighter (Walk Around) with a 200hp Johnson, the propeller is 19 pitch. Any idea is that the right propeller for this set. Boat takes time to get on plane and max MPH is about 25. Any help I will really appreciated.<br />Thank you
Top