Search results

  1. A

    Removing & Replacing bad fiber glass in my engine box?

    Somehow I knew somebody was going to give me a dose of reality!!!
  2. A

    Stringer replacement - Weep Holes

    Both you and Chevymaher have made excellent points.
  3. A

    Removing & Replacing bad fiber glass in my engine box?

    In addition to my general stringer inquiries, this is a very specific problem. the fiberglass in my engine box area appears to be separating from the original glass below. It will likely be a pain to reach all of the areas under the engine, but I going to try. My guess is I'll use a dremel...
  4. A

    Stringer replacement - Weep Holes

    I would think a totally seal floor will create its own moisture via condensation from the boat being in cold water and the sun heating up the floor. There is fiberglass along the bottom 3 to 5 inches of each stringer, so at least the foam wasn't used to stand the boards up. Here are...
  5. A

    Stringer replacement - Weep Holes

    Limber hole is a new word for my aging vocabulary. This seemed to be such a logical thing for them to have done. (GEEZE)
  6. A

    Stringer replacement - Weep Holes

    In 2015 I had a supposed professional replace the stringers and floor in a 1969 run-about. the original picture is what they removed from the boat. Image repair1 and repair2 were taken as they did the work. Jump forward to a few weeks ago, and it seems the cover was collecting water on the...
Top