Search results

  1. R

    honing cylinders

    when honing cylinders can regular oil work? wd40, used motor oil? ive honed and i still have what looks like a bit of staining, is this acceptable?
  2. R

    rebuilding motor tools

    gonna rebuild a bf90 next year sometime im stuck when it comes to calipers and micrometers measuring crankshaft journals with a micrometer is what ive seen so far but what about a venier caliper? whats the diference in measuring with either? and manual or electric whats the pros and cons or...
  3. R

    carbs needed for 86' 70hp John

    any places in florida i can call?<br />preferably
  4. R

    parts needed for 62' 5.5hp

    head to exaust housing gasket<br />impeller<br />impeller housing<br /> there is a glass fuel filter on the model is this available or do i have to get an aftermarket fuel filter?<br /> i cut out a gasket for the head to exaust so im asuming the combination of impeller and cracked impeller...
  5. R

    rude 5.5 62' used permatex on head to exuast, but leaked

    i didnt have the gasket so i used permaatex no1 but it still leakes also the water barely reaches the thermostat(thermostat cover open) so i know water isnt getting to cool the cylinder head, i may have used too much sealant?<br />i also cheked the impeller its still good,<br />i think the water...
  6. R

    removing 83 v4 pinion gear and bearings

    ive managed to get those darn ring clips out, took 2 days, a hanger, small needle nose pliers 2deep sockets and extensions. im reading my manual and it says i have to remove the pinion gear to remove the prop shaft and clutch/shift mech as a unit. they say use a socket but i only see room to fit...
  7. R

    holding flywheel still while removing nut

    just curious as what could be used to hold a flywheel still while removing that nut.im imagining that using a breaker bar and socket would require more holding of the flywheel than an impact wrench?
  8. R

    help with 1962 evinrude and finding screws by thread size

    im rebuilding an evinrude 1962"fisherman" 5524r<br />and i need a new impeller housing 323596(dont wanna mess with ebay)<br />are omc parts directly compatible with johnson evinrude?(same thing) the bolts i need are a m6x1.25 stainless steel, i cant find any online,and what would be the sae...
Top