Search results

  1. C

    Has anyone used more than one keelguard (side by side)?

    Just curious if anyone has used more than one keelguard? One down the center, and two on either side for further protection?
  2. C

    Is there any downside to this aluminum boat? Seems safe sturdy and light

    Like many of you, I'm always looking around for the next boat to buy sometime in future. I currently have a welded plate 17' side console with a .160 bottom. I trailer over some very rough roads (which eliminates a glass boat for me, as the rock chips are hard to prevent no matter what I'm...
  3. C

    Will a properly designed bow dodger deflect waves/water?

    I have a 17' side console welded aluminum. In an effort to add some wind protection and some safety, will a bow dodger that is snapped to the outside of the hull with stainless supports actually deflect water? Or will it simply crumple? Anyone have any experience with this? I know some...
  4. C

    Home made rock tamer / rock guard?

    Wondering if anyone has had any success with a home made rock guard? I was thinking a piece of L shaped aluminum attached to the hitch with a u-bolt and attaching some mud flaps. Thoughts? I don't really want to spend big bucks on a commercial one as I'm rarely on gravel roads.
  5. C

    4 blade prop on a Merc 40hp 4 stroke?

    I've got a 16' jetcraft welded aluminum rated for 60hp. I have a 40hp Merc EFI on it (not yet tested it on the water). As this is about minimum hp for this boat, would a 4-blade prop be a good idea for quick planing and cruising at plane at a lower speed? Have a big family trip coming up and...
  6. C

    Help! Horsepower decision on aluminum boat

    I have a jetcraft/harbercraft 16' (1625) side console. It is rated for 60hp. I can get a great deal on a very lightly used 40hp merc EFI with low hours. I've heard the 70% rule which would be 42hp. Problem is I've never been in this boat on the water (purchased with no motor). I'm told it...
  7. C

    Need info on a 1998 Honda 45hp

    Looking at a low hour 45hp Honda but don't know much about them. Are they fairly reliable? More importantly, what is the weight? I surfed around and couldn't find it. I suspect it is based on a 35hp and lighter than a 50hp? Thoughts?
  8. C

    Used 2005 50hp 4 stroke or rebuilt by factory tech 2 stroke?

    I'm looking at a used Merv 50hp 4 stroke EFI that had only salt water use, can't say how much it was every flushed. It is a 2005 model. Also looking at a Yamaha 85hp 2 stroke late 90's which was totally rebuilt by a Yamaha dealer (everything rebuilt - pistons, sleeves gaskets you name it)...
  9. C

    What would cause a bad crank bearing?

    What could cause a bad crank bearing on a 2 stroke? Looking at a mid-90's Yamaha Enduro (which is supposed to be made extra tough) that had a bad crank bearing, but everything has been rebuilt and runs great. No real history on it though - just curious what might cause this?
  10. C

    What is the best bet for an older 2 stroke 70hp?

    I'm looking for an older 70hp 2stroke, early to mid 90's I suppose. I found a great low hour Nissan but since discovered parts are tough to find as they are no longer being made. What do you think I should be looking for in terms of parts, durability and service?
  11. C

    Nissan NS70A2 - Can you find impellers/water pumps yet?

    I'm looking at buying a NS70A2 that is in great condition. But if I still can't get an impeller or water pump (or whatever else) then I won't bother. Any updates on getting this part? From Sierra or Tohatsu or ?
  12. C

    What do you think of a '97 Johnson 70hp for $1000 or less?

    Owner says 3weeks of holiday use per year. Has all controls etc. He is open to offers and willing to deliver it to mechanic for inspection. I've only ever run Yamaha but need cheap power. Thoughts? Will this do me for a few years?
  13. C

    Slight delamination on aluminum boat, cause for concern?

    I have a 2005 Jetcraft welded aluminum. I noticed in the bow (close to the gunnel), I can press on it and it feels like a thin outer later has seperated from a heavier inner layer of aluminum. Goes down maybe 1/8 inch (or less) until it hits the "inner" hull, and only 5 inche square spot. I...
  14. C

    Recommend a cooler for custom cooler seat/bench

    I am changing the seating in my 17ft aluminum side console from 4 chairs on pedastals to 2 chairs (captain/passenger) and 2 coolers with bench seats along the sides of the boat. The commercial ones are way too pricey so I found a custom shop that can make a bench seat for the cooler with a...
  15. C

    Anyone try a bimini with a front enclosure on a boat without a windshield?

    I now have a 17ft aluminum side console. I can get a bimini made with a clear front (zipper down the middle to access bow) and clear sides. Has anyone tried this kind of setup? Thoughts? I don't want to spend the money if it's not worth it. I'm a little worried about spray covering the...
  16. C

    Pre-drilled transom on aluminum boat?

    I'm looking at a "new" heavy guage aluminum boat that has been sitting at a dealer for 3 years (!) without a motor. Dealer will replace sun-faded components but that tells me it has been sitting outside a lot (does not have any wood, composite floors etc). Anyway the transom already has holes...
  17. C

    Where do you compromise on a used boat?

    I'm looking for a newer tin boat with windshield, 16-17ft on the private used market. For my budget, and considering what's available, there are lots of compromises to make. Just curious where you would compromise and where you wouldn't? For example, I can get a bigger but lighter gauge...
  18. C

    Any thoughts on the Gregor windshield boats (e.g., MX780)?

    I spoke with a person who said that the Gregor windshield boats are not that great - not a great construction and thinnish hull at .080. Thing is, these are very nicely priced on the used market, have the perfect length for me (17ft) and a little lighter to tow and move around. There is very...
  19. C

    Anyone move from a 16' aluminum to an 18'? Tiller to steering wheel? Worth it?

    Ok I likely know the answer to this but wanted some feedback anyway given that it is too cold to boat and I have time to think about this move. Currently I've a got a Lund 16' SSV with 72" beam and 40hp Yamaha tiller (no tilt, no electric start). Used it with the family much more than I...
  20. C

    Bottom of trailer light lens cracked, water gets in, is this a problem?

    The bottom of the lense of my boat trailer cracked (and fell out). But looking directly at the lens you would never tell anything is wrong. This will allow water in (obviously) when I launch, but I don't think it was waterproof to begin with (2004 ezloader with regular lightbulbs). The other...
Top