Search results

  1. clevecan

    1993 Johnson 150

    VJ150ELATG My motor seems to run ruff from just above idle to 1500 to 2000 rpm, above that runs great. Starts great as well. I just put 6 new carb. Kits omcParts. Floats and all. New plugs and still having this problem. So when I go to throttle up it runs kinda ruff but once I exceed...
  2. clevecan

    1992 evinrude 140 idle problem

    E140TLETC G 03184443 runs great at speed anything over. 1/3 throttle But at idle it seems to idle real low rpm and dies while in gear. I did comp test 140 lb per cylinder. Did spark test with tester it jumps a 7/16 spark on all 4. I did run some bad gas from tank with water bad trash but had...
  3. clevecan

    1986 evinrude 70 hp VRO pump bad

    Mod# E70TLC0S. 1986 evinrude, 70hp Ser# J0557162 My VRO fuel pump must be weak or bad, Can I replace it with normal Fuel pump? The small one. If so any part# for what I will need to replace the VRO pump.
  4. clevecan

    1990 yamaha 175 hp idel and bogging problem

    Hi all, I bought a 1991 Kingfisher with a Yamaha 175 that has been sitting for years in there garage. the boat and motor looks new. He said he only ran it 3 or 5 times sence new off showroom. I could tell when he cranked it on water hose it was running a little rough but he had been out there...
  5. clevecan

    1990 Pro 150 yamaha

    I just bought a 1990 bass boat with a 1990 yamaha 150 proV and was wondering if a johnson or mercury prop would fit it? I see it is a 15 spline hub and seems my older johnson's were as well. I need to replace my prop so any info would help. Thanks... Someone told me on the lake yesterday thay a...
  6. clevecan

    1990 XR4 black Max

    Can someone tell me if my 1990 model 150 XR4 Black Max is a 2.0 or a 2.4 Liter? I'm not sure and would like to know. I,ve been told it was a 2.4 and I was told it was the same as the 200 just I guess smaller reeds and carbs.
  7. clevecan

    DT 150 Suzuki 1986

    What props will fit this motor? seems I have seen that other brands will fit. merc,yammy? I'd like to know where I can find a used one.
  8. clevecan

    mariner gear case oil

    Hi all, I changed my lower unit oil on my 1987 200hp Mariner, old oil was black in color and thicker than the mercury lower unit oil I bought to replace it with. the old oil was in good shape and no discolor or parts or shaveings. But the new oil seems alot thinner but it says mercury lower unit...
  9. clevecan

    mariner 200hp engine throttle cable adjustment

    Hi all, I was ajusting my shift and throttle cable and I seen that at full throttle my carb blades are only 5/8's open. so I removed throttle cable and ajusted it to where the carb. blades were open 7/8's not all the way to stops on carbs not wanting them to hit and damage them,then I pushed...
  10. clevecan

    replaceing the trim seals on my 1987 mariner 200

    I have a problem with my trim slowly leaking down, I was told to remover the port side trim rod and clean the check valve, OK the cap that the Spanner Wrench unscrews what way do I turn it to remove it? lefty losey or right? before I go getting tough with it i'd like to know which way to spin...
  11. clevecan

    1987 mariner 200HP

    I was wondering if I should and or can put oil in the tank I see on the motor in front of flywheel? I do keep oil in the oil tank in the boat on my ranger 393 but was just wondering if the other tank up there should be full? or half full?
  12. clevecan

    Tilt& Trim problem

    I have a 1987 200 HP maniner on my 393 ranger and for some reason the tilt&trim is leaking down just won't hold in place. There are no leaks not a drop! So why would it do this? it leaks down slowly but if you watch it you can see it drop/ it works fine other than this problem. any help please.
  13. clevecan

    1985 mariner magnum 150 HP

    Hi all, I bought a ranger bass boat with a 1985 mariner 150 ser# 6637526 thats the # on the tag on the motor. It is missing the tilt&trim motor,the guy I bought it from took the motor part off and said it was full of rust and water. now I need to get one to replace it. He did not give me the old...
  14. clevecan

    1987 johnson 150GT

    Hi, I have a bass boat with a great running GT150 johnson, what I need to know is does this motor have a clutch persay in the lower unit, it seems like it slips sometime under throttle. checked prop for maybe spun hub no sign even changed it and tryed another prop.i'm running a 22 pitch raker...
  15. clevecan

    1987 johnson GT150 V/6 power problem

    Hello all, My J150GTLCUR 150GT has been giving me troubles, It starts fine but once I go to throttle it up above 1/4 throttle it boggs and just won.t take off.So Heres where I'm at! I have rebuilt all three carbs to the core! found lower carb had cracked tubes in the bowl the ones that have...
  16. clevecan

    cracked tube on johnson carb 150GT

    Heres a photo of the tube i'm talking about. My boat started bogging when throttleing up so rebuilt carbs and seen the lower carb has cracks in the brass tube that has a smaller tube inside it.Has anyone had this happen and if so what will it efect I think a lean condition, I could not get a...
  17. clevecan

    Water pump 115 evinrude

    My friend next door went out today on his sea ray, He said it fired right up as always. then! about two miles out he had seen that a few boaters were waving so he waved back! He said then he could tell they were not jestering hi they were saying hey!!!! your motor is smokeing and on fire!:( So I...
  18. clevecan

    1987 GT150 Johnson motor color code?

    I have a 1987 GT150 johnson , It's the same color as my 1990 GT150 it's a gray type color anyone know what color it is where I can repaint the cover?
  19. clevecan

    1987 GT150 Johnson fuel problem?

    I ran my boat today and it starts fine, when I give it throttle it boggs. I can push the key in as i'm trying to get on a plane and it will take off! once I get it going it seems to be not getting enough gas as I can push the key in and zoom zoom off it goes. It is a VRO and still is oil...
  20. clevecan

    what is max RPM for 150GT

    I have a 1990 150GT and just want to know at WOT what should I be looking for? thanks
Top