Search results

  1. C

    If I buy a prop that's the wrong rotation, can I just swap wires?

    I bought a 1977 Webbcraft with a stringer I/O and a 351w. it has a ss prop on it and on the first trip to test it, it went forward, with the control in reverse, this is a electric shift pin drive, no splines prop. I have the work history on the boat and the I/O was removed 7 years ago and I...
  2. C

    very old Sea king 405 trolling motor prop replacement

    Anyone know what might fit? The shaft is 5/16 and uses a pin to hold it on thanks.
  3. C

    40hp lark 69 motor with 70 controls

    I have the yellow plug on the 70 controls versis my black plug on my 69 selectric shift about figured out with the exception of how to kill it since the 69 control has both mag wires going to the control but the 70 only uses one it seems.
  4. C

    cable & pully steering tension springs

    are they avilable on this site, I looked for them and had no luck. I need 2
  5. C

    lower unit seals

    Is this the only seal that usually goes out, besides the gaskets on the fill and drain plugs. My problem is, This 1969 motor has sat for who knows how long, it is still full of lower unit oil and there is no sign of seal leakage. I pulled off the prop and there is even cosmoline still on the...
  6. C

    vacuum line on 69 lark 40 hp

    Directly under the carb is a vacuum port with a rubber hose on it that's unconnected my motor. Any idea where it goes? I have a vacuum line on the vac switch and it's connected, do 2 lines go to the switch? I had the carb off and looked over the choke and didn't see a barb for it anywhere. The...
Top