Search results

  1. Outrage 19

    1990 115 And 1995 88 Looper or Crossflow

    I have two Evinrude outboards. One is a 1990 115, the other a 1995 88. My question is are the both Loopers or Crossflow or one of each? If one of each which is which?
  2. Outrage 19

    82 Grady White Re-Power or Not

    Hi All It’s been a while since I’ve been on this forum and over the years I’ve gotten some great advice. My previous boats have all been Outboards so this is my first I\O. I just picked up a 1982 Grady White Chesapeake 212 with an OMC 140 hp I\O. It’s been sitting since 1996 and the engine...
  3. Outrage 19

    82 Evinrude 140; 84 Evinrude 90 Any Parts Interchangeable

    I?m particularly interested in the lower unit (See my previous post titled Clack Clack Clack Clack Bang; What Just Happened. The 90 lower unit has milky oil (signs of water). The 140 is black and shows no signs of water. Can I just change one for the other?
  4. Outrage 19

    Clack Clack Clack Clack Bang; What Just Happened

    I don?t know Can you get it started again I?ll try??..No its locked up Oh look there?s water coming from under the hood That?s not good Any One Need Spare Parts from an 82 Evinrude 140
  5. Outrage 19

    I Think I've Got Another Blown Reg / Rec

    It looks like I have blown another Regulator / Rectifier and at $120 I can?t afford a replacement right now. Can I run for the holiday weekend with it disconnected or will I damage to the Stater? I figure I?ll have to charge the battery each night, is there any thing else I'll have to do.
  6. Outrage 19

    Disabling Fast Start On 1988 90hp

    How can I tell if my engine has the Fast Start feature and how can I disable it if it does? I need to do Joe Reeves Timing Without Test Wheel. Thanks Outrage 19
  7. Outrage 19

    Timing Question 1988 90 VRO

    While trouble shooting my over heating problem I found that the engine wouldn?t run over 3000 RPM. So I did as much of the Link & Sync process as I could (not having a test prop I couldn?t properly set the timing). I now have full throttle at 5500 RPM but at idle she bucks and sneezes like the...
  8. Outrage 19

    1988 Evinrude 90 Overheating

    It seems I have an overheating problem. I started my motor on the hose and after about 5 minutes I noticed there wasn?t any water coming from the tell tail so I shut her down and pulled the lower unit to replaced the water pump. While I had the lower unit off I wanted to confirm I didn?t have...
  9. Outrage 19

    Evinrude 90 Regulator / Rectifier Tach Circuit Question

    I have a 1988 Evinrude 90 VRO with the VRO disabled. My Tach doesn’t work. My manual says “Check for 11 volts at the gray wire coming out of the Regulator / Rectifier at 1000 RPM. I can’t tell exactly how fast the engine is turning but it sounds like it’s faster than 1000 RPM and I get 0...
  10. Outrage 19

    90hp Evinrude Tach Question

    I started my engine the other day and looked at the tach to see how fast it was turning. I noticed the tach wasn’t working so I did what any good mechanic would do I taped it with my finger and the needle brakes off. So off to my favorite shopping mall EBay and sure enough I find an assortment...
  11. Outrage 19

    1988 Evinrude 90 VRO Project

    Ok here goes I got this old boat (bought it from a friend pretty cheep). The trailer looks good needs roller cradles (I’m converting to bunks any way). The boat turns out to be a 1963 Wellcraft Runabout (needs lots of work; looks like it was used as a work boat for a number of years). Ok on...
  12. Outrage 19

    What Kind Of Engine Is This

    I finally found the Welch plug berried under a mouse nest and ided my motor. It’s a 1988 Evinrude 90 hp. I have a question of curiosity. Is this engine a lopper or a crossfire or anything like that?
  13. Outrage 19

    What Size Battery

    What's a good size battery to use for a mid 80s Evinrude 90.
  14. Outrage 19

    Motor ID

    This is kind of a continuation of my last post Tilt & Trim Release but the subject has changed to Motor ID. The outside ID plate is missing; the cover says Evinrude 90 and VRO. Anyone have a clue where the ID Plug on the block should be? I’m trying to ID it so I can order a manual for it.
  15. Outrage 19

    Tilt & Trim Release

    I picked up an old Wellcraft with an Evinrude 90 on it. I need to identify the year of the motor (looks to me to be between late 70s and mid 80s) but I can’t get the cover off because the tilt & trim are in the up position and the outside SN plate is missing. Is their a manual release for the...
  16. Outrage 19

    1963 Wellcraft Need Info

    Hi All, I picked up this used boat today and by the title it’s a 1963 Wellcraft 19’ Runabout. The capacities plate is missing and I’d like to find out things like Max HP and Weight Capacity. I looked on Wellcraft’s web site but only found info on current models. Does anyone know where I can...
  17. Outrage 19

    I Hate My Trailer Please Help

    While loading the boat on the trailer, a1975 19’ Boston Whaler Outrage, the boat slipped off the keel rollers and the roller cradle on the port side cracked the hull. Ignorant me says “No problem, I’ll get some resin and patch it”. The next trip out I kept an eye on how much water drained when...
  18. Outrage 19

    Replaceing Prop Hub

    Hay fellas, anyone out there ever replace there own prop hub? Is it just a matter of pressing the old one out and pressing the new one in, or is there some trick to it that makes it worth taking to the prop shop?
  19. Outrage 19

    7.5 With A Kick

    1955 Fleet Twin 7.5hp. If I gun it from idle sometimes it will kick hard then go. Is this normal?
  20. Outrage 19

    1987 Merc V150 Revves Up Wont Go

    Hi fellows,<br /><br />I was out fishing this weekend and on the way back the engine, 1987 Merc V150, revved up and we started to slow down. I put it in neutral and back in forward slow and she moved. When I started to slowly increase throttle she revved up again. I put it back in neutral...
Top