Search results

  1. R

    Neutral Switch for a Yamaha 704 contol

    The one I own is about 12 years old. I would like to purchase one from iboats but was told they don?t carry it. Could someone please tell me if there is an aftermarket part that I could order from this site? Thanks in advance.
  2. R

    Ignition issue

    All, At times I am having problems with my ignition not turning the motor over. To be exact, nothing happens when the key is turned. I believe the real problem is in the shifting lever not telling the ignition the motor is in neutral. The reason I say this is when I work the shifting lever...
  3. R

    Bad fiberglass repair

    All, Could I please get your advice on how I should proceed with a small area I paid to have repaired? Please see the attached pictures of the before and after. The boat is a 1988 17? Boston Whaler Montauk. The damage I believe was caused by road debris. Unfortunately I didn?t notice the...
  4. R

    Converting boat from an I/O to a OB

    Gentlemen, I am considering converting my boat from an I/O to a OB. I would appreciate your opinions. The boat is a 1982 Boston Whaler Revenge with a removed GM 350. My ultimate goal would be to patch the outdrive hole and add an offset bracket, but money is tight. If you look closely at...
  5. R

    What?s a short block gm 350 worth in parts with a suspect crack in the block?

    Here?s the short of the long with the engine. It?s a marine remanufactured block with low hours and ran according to the PO. It sat unused for over a year and the PO thinks rain water got into the air intake causing it to seize. I latter found water in the oil is why I assume the block is...
  6. R

    Float issue?

    Gents, I have a 1989 Johson 8 hp with carb issues. When the engine is running ?rough?, gas is steadily coming for the hole in the Carb in the attached picture. When I disconnect the fuel line the gas over flow stops and the engine runs great? Does this sound like a stuck float in the open...
  7. R

    Mercury 8hp slow to respond

    My 2001 Mercury 8hp is slow to respond when advancing throtle. It will reach full RPM, but takes longer than normal. I have rebuilt the carb and adjusted the setting but hasn't help. Can anyone please offer any suggestions?
  8. R

    Removing rust from block?s water passages.

    What is the best way to remove rust paticles from the block?s water passages without totally refurbishing the block? I believe the word is called scaling. My concern is rust particles blocking the Exhaust Manifolds and Risers. Thanks.
  9. R

    Spacing the engine up.

    What type of base due you use to space the engine mounting foot, when an engine needs to be spaced up? I asked b/c the boat I purchased someone used 2x4s to space the mounting foot up. Was this standard procedure or was it Jerry rigged?
Top