Search results

  1. M

    sparkplug question

    Hi Guys, I've two different sources telling me two different things about which plugs to use and which gap to set them at. I have an 82 60hp Johnson. One source, is telling me to use Champion L77J4 set at .040 The other is telling me to use Champion QL77JC4 set at .030 I can understand the...
  2. M

    74 Lightwin Fuel Pump

    Hi Guys, I just picked up a 74 4hp lightwin. Its sucking air from the fuel pump and I'd like to try and rebuid it before just replacing it. The earliest year I'm seeing a rebuild kit available is 81. Any chance I can use that or maybe even use a newer year pump altogether?
  3. M

    So I've been working on my 82 Johnson 60hp

    I do have a question, which key should be used for the impeller? I would like to use the stainless steel pin but would welcome advice. The two keys that came with the new water pump kit are the black and white ones. Only the black one fits. The original stainless steel pin fits too. Any thoughts?
  4. M

    Thermostat and Spring Valve Replacement

    Hello, Are the thermostat and spring valve regular maintenance items? I picked up a 82 Johnson 60hp and have it in the garage doing the odds and ends that need to be done, carb rebuilds, new fuel lines, engine harness rebuild and lower work, all the regular stuff. I am curious if the thermostat...
  5. M

    Johnson lower / gearcase removal

    Hi Guys, I'm getting ready to drop the lower / gearcase on a Johnson I just bought and have a question. I'm waiting for my manual to come in and I read some manuals on line that I could find, but did see any mention of this. I'm trying to find any information about what position of the shifter...
  6. M

    Motorola to Delco Alt Swap

    Hello, I currently have a 1980 MC120 with a Motorola alternator. As I'm sure most here know it has a 4 wire, external voltage regulator. This alt. is rated at 37 amps. I am attempting to make this boat and engine as bulletproof as possible and would really like to swap the current motorola alt...
  7. M

    Restoration Questions Poly or Epoxy / Stringer Install

    Hello, I've been doing quite abit of reading and have a good idea of where I'm heading with my project but have a couple of quick questions. Specs; 1980 Renken V900 18.5 foot 1. How do I find out what the hull is made of? After reading OOPs hull extension thread it seems most boats are made...
  8. M

    Fuel Tank Size

    I might have this question in the wrong forum, maybe not..... I guess I did, thanks for the move.;) Specifics: Boat; 18.8' Renken Engine; MC 120 O/D; #1 with 1:1.98 Prop; 19p Planned cruising RPM; 3000 to 3500 Speed really is not important, basically I want a steady, get there and get back...
  9. M

    Merc 200 Driveshaft Question

    Hello, I have a 1968 Merc 200 and want to put a stainless steel drive shaft in it. I've read that Mercury changed to s/s shafts in or about 1975. My question is, is the drive shaft the same in a 40 hp Merc as the Merc 200? I have a line on a couple of cheap ones and I'm hoping the parts are the...
  10. M

    1980 Merc Drive ID?

    I might be overthinking this but after looking at all of the guides in the info section, I have questions concerning the drive on my project boat. 1980 900 Renken 18.6' Mercruiser GM120 CID 153 2.5L serial number 5755817 Rochester 2GC carb AC Delco starter Carter low volume fuel pump Sterndrive...
  11. M

    I'm looking at a boat to buy.

    Hello to all. This forum is really nice. It's helped me rebuild a "68" Mec 200 for my 14' Mirrocraft and clued me into Smart Tabs. Anyways, reading this forum has really lit a fire to get another bigger boat. I live 40 minutes from Lake Erie. I'm currently looking to get a "78" 20' Winner with...
Top