Search results

  1. meyerboy

    Cruise n Carry 6500 12 lb 1.5hp outboard nylon bushings

    I know I am not the first, or only frustrated Cruise n Carry owner looking for spacer bushings that fit into the transom mount. What I want to know is, has anyone out there come up with a genius way to work around the problem and create substitute bushings? About a year ago, I saw these little...
  2. meyerboy

    Sprocket hub to start an outboard with a hand drill

    Has anyone ever seen or heard of such a thing?
  3. meyerboy

    Evinrude 2hp Getting water in the cylinder

    Early 1980's Evinrude "Mate"..... took it out on my Avon Rover, and wanted to flush when I got home, and when it started, it ran at maybe 15% with the throttle held wide open. Took the plug out and it was hydrated with grey looking water..... so I popped the head and even more water... replaced...
  4. meyerboy

    Fuel Line Primer for Clinton J9

    I got this Clinton last week, and going through it was easy enough. BUT.. when I inspected the fuel line that came with the motor, I found that the primer (an 8 inch long 1 inch diameter squeeze pump) is blowing on BOTH ends. Shouldn't it suck fuel on one side and blow out the other ?? It's...
  5. meyerboy

    1963 Eska Skipper 3hp Restoration

    I came across this outboard (for 30.00) and could not resist bringing it back to life. I went through the ignition and got spark, then cleaned the aviation carb (no bowl version) and re-cleaned. And low and behold, she ran. You gotta love 50 year old outboards!!! Question: it looks like the...
  6. meyerboy

    1966 Evinrude 3hp Folder having issues

    It has been a while since I have posted here.. I build wooden fishing boats and when I start a new one (which I did in April) it can occupy every free minute for half a year... but I'm baaaack!! OK.. saw an ad for a folding 3hp little-rude and I bought it a really low price. (so I thought) All...
  7. meyerboy

    5.0 Tecumseh Game Fisher: need help with igintion coil

    Need some help here. I have no spark what-so-ever, so the flywheel is off and I think I know what the problem is (maybe). OK, with the points open, the terminal bolt is still grounded to the power head, and this is not right. After all, the terminal bolt is insulated where it goes through the...
  8. meyerboy

    British Seagull throttle cable extension resource needed

    OK, this is a long shot, but I have had pretty good luck with this forum in the past so here goes: I am building a Gator Swamp boat and I want to install a remote British Seagull on the back (I have a 1972 Forty- Featherweight). The hull is so narrow (it's a true Pirogue) that turning around...
  9. meyerboy

    Real Barn Find 10014 in fine condition

    I have been away for a bit, mostly building wooden skiffs...but I had to check in and show you that under the heaps of junk out there, there are some jewels still remaining. I answered an ad on my local CL and without a lot of hope, I met an older gent that had this motor in the back of his...
  10. meyerboy

    Very specific problem with a 1975 Johnson 40hp...need creative solutions

    This outboard is on a 1974 16' Starcraft Supersport that I just inherited. It was having problems shifting smoothly (or at all) from the remote shifter, and I removed the powerhead on a hunch that the rubbers were gone that connect the lower pan to the exhaust tube. I was correct. The rubber...
  11. meyerboy

    115 Yamaha 4-stroke relay is buzzing

    Was getting ready to go out tomorrow early, and wanted to do a last minute outboard warm-up and BAM no power to anything at the motor, the dash is full power. The power trim is dead, will not turn over and the only sign of life is a buzzzzz coming out of a relay part# SM2210 or 9K16 (both...
  12. meyerboy

    Tanaka Aquabug 1.75 no spark

    just picked this guy up for a whopping 20 bucks. I have a 1.2 that needs a new gas tank, so I thought I would rob this 1.75 and be happy. BUT the 1.75 looks like a very low hours outboard, lots of compression, super clean... but no fire at all. Got to the coil, it looks brand new, took...
  13. meyerboy

    OMC Cowling Gasket Material

    :confused:Years ago there was a source mentioned here whereby you could obtain replacement cowling gasket material by the foot. Anyone else remember the post ???, or know of the source?
  14. meyerboy

    6hp Mystery Motor

    You gotta love those Duck Hunters!! Just got an UGLY 6hp long shaft that (naturally) was rattle-can painted camo, and the transom tag said it is a 6902M. My research says I have a 1969 Evinrude 6hp, however,when I started to clean the thing up, I noticed that: 1. Everything under the cowl is...
  15. meyerboy

    1978 Johnson 4hp CD Mag Motor decals in French??

    Happy New Year! I was on the recieving end of someone's resolution to clean out the garage, and he had a 4hp laying on the ground. I was really not interested in the motor, but the decals really surprized me as they are in French. Too much temptation, bought it for three twenties, and...
  16. meyerboy

    1965 Evinrude 5.5 Fisherman cylinder head MYSTERY??

    First off, this motor was a throw-in to sweeten a deal on another motor, or in otherwords I have nothing invested. She runs very well, nice and smooth, and starts easily. Here is the mystery... if you look you will see that the head is sealed with JB Weld!! Here is the question: I want to...
  17. meyerboy

    1967 Johnson 3hp Rebuilding and stuck

    This post is not for the casual tinker-type (which I am), there is a problem here that is beyond my ability. The motor: Guy goes out and buys this fold-a-way in 1967 brand new, and as the proud owner, he puts gas in and fires her right up. He made only one mistake, after all, he has a mower...
  18. meyerboy

    1955 Lightwin 3hp Ingition plate Creeping

    Like it says, a rescued 1955 3hp, just opened her up today and all the usual culprits. Really bad coils, points ugly, carb full of Aunt Jamima's syrup, you know the drill. But the doc (me) was in today, and a few parts later, she is singing in the tank. Problem: at idle, the stator plate is...
  19. meyerboy

    1989 3hp Made for Sears (who made it?)

    A guy is trying to get me to buy a 1989 Sears Gamefisher 3hp. I used to have a file that told me who the manufacturer was, but I can't find it. I am thinking it is a Chrylser, but could be wrong. any help? thanks,
  20. meyerboy

    3hp powerhead folding vs non-folding

    It appears that OMC altered the powerhead for the 3hp the year they decided to offer the fold-up option. case in point.... the 1960 powerhead on the right cannot be mounted on the 1967 folding outboard that I want to becuase of the collar opening just around the shaft seal is bigger on the...
Top