Search results

  1. G

    1988 125hp force flywheel

    is there supose to be a crack in the magnet on the inside of the flywheel
  2. G

    1988 125hp force needle and seat

    i wouuld like to know where i can get some all metal needles because i read in a post that they have a bad habbit of sticking. i think i am having that problem. sometimes it seams to be starving for fuel at wot and sometimes it is ok. also do they make the kind that have the little spring clip...
  3. G

    125 hp force carbs

    where can I find the proper carb kits for this engine. part numbers please
  4. G

    1988 125hp force

    the fuel pump primer ball wont get firm when you pump it but the motor still starts and runs good. is this a problem i should worry about?
  5. G

    old 18 horse johnson

    i just bought a 18 horse johnson and i am trying to get it running for a kicker motor. i need to know if it has a fuel pump. i have fire and comp. but don,t seem to be geting fuel. not sure of serial no. will post tomorrow
  6. G

    force specifications

    in the clymer manual the spec chart says 125hp 1984-1988c 125hp 1988c-1989. how do i know which one i have. i thought it was a 1988 but not sure it could be a 1989.
  7. G

    125hp force 1988

    the problem is when you run the boat the warmer the engine gets there seems to be some kind of breakdown in the ignition system. there is a miss that comes and goes at high speed. if you back off on the throttle it seems to go away. my guess is a coil or a cd box. can anyone tell me the proper...
  8. G

    driveshaft

    1988 125hp force. i pulled the lower unit and when i did the crankshaft spline seal fell off and i am not sure which way the cupped edge went. i think it was up. i have a manual but the picture is not clear enough to tell. please help
  9. G

    propellers

    i would like to know where i can find a cross reference for all props. i need to find out all the props that will fit a 1988 125hp force.there are alot of props being sold on ebay by numbers and i need to know if they will fit or not.i am looking for a 15 pitch any brand.
  10. G

    props

    1988 125 hp force will mercury props or any other props fit this force and does anyone know where i can find a cross reference for all props
  11. G

    thru hub exhaust

    are 1988 125 force motors thru hub exhaust or not
  12. G

    triggers

    just what is a triggers function and how can you tell if it is bad?
  13. G

    FORCE 01

    WHAT IS THE PUDLLING SYSTEM YOU TALK ABOUT IN YOUR POST TO JABA
  14. G

    tilt and trim switch

    1988 force 125 hp. i would like to know how to wire a tilt switch at the motor so i can opperate it from the back of the boat,
  15. G

    rpm's on 1988 force 125hp

    i would like to know what the rpm's should be at wot on this motor
  16. G

    force heat alarm

    1988 125hp force on a 19 ft. bayliner. i would like to know if this boat has an alarm,where it is located,and how i can test it to see if it is woking.
  17. G

    SPEEDOMETERS

    1988 bayliner capri with 125hp. force. i would like to know if there is a webb sight where i cane order one of those things that goes on the back of the boat that makes the speedometer work, and what it is called. mine was broke when i bought the boat. thanks in advance.<br /><br />...
  18. G

    125hp force tachs

    i have a 1988 force 125hp. it runs great. i have a little problem with my tach. it seems to be reading high at idle or when running wide open. i need to know if there is a way to adjust or is something wrong with it. it is a tach on a bayliner that is a graph like. when running wide open it pegs...
  19. G

    1988 125hp force

    when i pulled the plugs it seemed that one plug was steam cleaned. it seems water is geting in that cylinder. whats next.
  20. G

    water pump

    could someone tell me about what the cost of having a new impeller installed in a 125hp force 1988.
Top