Search results

  1. W

    150hp XR-4 lower crank bearing replacement

    Can anyone give me any advice as to what is involved to replace the lower crank bearing on a 1988 150hp Mercury XR-4 outboard? Looks like a ball bearing on the bottom. Not sure if I need to split the engine cases or just remove the powerhead to replace it. Any advice would be appreciated.
  2. W

    XR4 idle mixture adjustment for smoother idle?

    Anyone know if the carbs on a 1988 XR4 V-6 have any sort of adjustment for smoothing the idle on each carb? Motor starts good and runs like a son of a gun at wide open throttle but the idle doesn't seem smooth or sound right. Seems to be bucking as if missing at idle and just off idle. Maybe one...
  3. W

    85 lower unit with preload fit 88 without

    I have a 1988 XR4 150hp with the small gearcase lower unit. I bought a 1985 lower unit from a 150hp with the large gearcase but it has the preload pin. Anyone know if it will work on my XR4, or if I need to remove the preload pin, or if it will not fit? Looks the same, and both are for 20"...
  4. W

    Mercury oil injection operation question.

    Hello: I just bought a 1989 XR4 150hp with oil injection. The tube that runs from the oil pump to the check T where it mixes with the gas is never filled solid with oil. Only oil in the bottom 1/4 of the tube. Is this normal at idle. Oil system works and adds oil but never fills the tube. Uses...
  5. W

    1973 Mercury 1500 hard to start?

    I have a 1973 Mercury 150hp inline 6 that is hard to start when cold. Warm it fires right up. Rebuilt the carbs, new plugs, max advance at 20 deg., 100psi on all 6 cylinders.(A bit low but even) Has to crank for 2 minutes before it starts when it's cold? Pumped the ball primer, tried choke or no...
Top