Search results

  1. J

    2002 Nissan 4str 6hp shift linkage problem

    2002 Nissan 4str 6hp . model 6A2-3R4-1 While removing the lower unit I forgot to release or seperate the shift rod from the cam rod. I pulled the lower unit and it got hung up when seperated about 2"... I pushed up on the lower unit again. At this point I noticed the mistake. The result is...
  2. J

    2002 Nissan 6hp long shaft bushing stop

    there is a bushing assembly on the drive shaft(about half-way down) that has a plate attached called a bushing stop(part # 369-64332-0). This plate has corroded and fallen off....it was attached by 2 screws. How difficult would it be to loosen these screws as I would assume that they may also be...
  3. J

    2002 Nissan 6hp lower unit oil change

    unfortunately, I have not changed the lower unit oil for 10 yrs.....I tried to remove the screws for the fill-up and can not make them budge.....I am wary of applying too much force for fear of shearing the screws....any tips/ideas on how to loosen these screws...thanks
  4. J

    Galvanic corrosion on prop

    I just replaced the prop on a 2002 6hp 4str with a hi-thrust prop.......on inspecting the original prob I found the hub on one side corroded completely thru for about 80% of the length.....amazing that it had not failed already....I assumed this was due to galvanic corrosion as the prop is...
  5. J

    Nissan 6hp 4str-vibration

    I have a 2002 6hp-4str outbd on a 23 ft sailboat. been satisfied with the engine except for the following: Finicky low-speed carborator fouling....so far have used a fuel stabilizer and also Techron(at about twice the suggested conc) in the gas tank and along with running the engine dry after...
  6. J

    Nissan 6hp Hi-Thrust prop.

    I have a 2002 nissan 6hp 4stroke long shaft with a standard prop. I would like to change the prop to a lower pitch. There seems to be 2 different props with a 6" pitch available. 7.9x6..part #393B645121 8.375x6...part #399B645121 does anyone know the difference between these and which one would...
  7. J

    NISSAN 6hp-4srtroke, 2002 idle problems

    have 2002 6hp nissan 4 stroke..ran ok for first couple of years, then it began to cut out at idle. I then used a mixture of about 20% Techron and 80% gas and let it run for about 2 hours....it fixed the problem. I now put some techron in the gas(not as high as 20%) and it seems to keep the carb...
Top