Search results

  1. W

    Floor Repair

    Has anyone tried using Al decking instead of wood for repairing the floor in an Al boat?
  2. W

    1994 Johnson 40hp vro dies

    Engine starts then dies after about ten seconds of running. The fuel bulb is soft but pumping it to try and keep the engine running does not help.<br />The engine will restart then die again and again<br />Any ideas?
  3. W

    Flywheel removal 84 mariner 90hp

    What type of puller do you need to remove the flywheel? Or can you remove the 6 bolts markit then remove the flywheel to replace the stator?
  4. W

    84 mariner dies above 2200 rpm 90hp

    I have replace one switchbox because 2 and 5 were not firing. All of the plugs are now firing when grounded to the engine.I have replaced the fuel hoses back to the tank. I have rebuild the fuel pump and new floats and needle and seats.<br />I have checked the resistance of the stator with the...
  5. W

    Fuel fittings

    Can anyone tell me what type of plastic fitting I can use to replace the plastic hose to pipe fitting at the fuel tank. The pickup line is made of alumiminium with a plastic connector?<br />Can I use a nylon connector?
  6. W

    Fuel fittings

    Can anyone tell me what type of plastic fitting I can use to replace the plastic hose to pipe fitting at the fuel tank. The pickup line is made of alumiminium with a plastic connector?<br />Can I use a nylon connector?<br />Thanks
  7. W

    Mariner stator testing

    1984 90hp mariner SN6399108<br />How do you test the stator without a peak volt meter?<br />Can you use a scope to look at the peak voltages?<br />Thanks
  8. W

    Mariner stator

    I have a 90hp 1984 inline 6 Mariner outboard<br />How do you check the resistance in the stator and the trigger coil to insure they are ok when you have a spark plug not firing. I think i have a bad switch box but want to be sure. <br />Can you replace one switch box at a time or only in...
  9. W

    Mariner stator

    I have a 90hp 1984 inline 6 Mariner outboard<br />How do you check the resistance in the stator and the trigger coil to insure they are ok when you have a spark plug not firing. I think i have a bad switch box but want to be sure. <br />Can you replace one switch box at a time or only in...
  10. W

    Mariner 90hp spark

    I have a 1984 mariner inline 6 90 hp motor with no spark on cylinde #3. I tested the no spark by removeing all of the plugs then cranking the engine with the plugs grounded. There was no spark on plug no 3. So I then changed the coil wires between coils 2 and 3 and then plug #2 didnt have any...
Top