Search results

  1. T

    96 evinrude 112 spl temp sensor / running issues

    Just replaced the head gaskets, head cover gaskets, and water pump on my motor. I accidentally pulled the wire off one of the temp sensors so I crimped it back in to place. When I went to start the motor the water temp illuminates and stays on. It does not have the "beep/buzz sound that it...
  2. T

    96 evinrude 112 spl stalls

    I have had this boat (20' pontoon) for around 5 years now. The problem I've had started last year. It will start up fine. It will idle in neutral, occasionally I will have to increase the throttle to keep it from dying. When putting it into gear it would run a varying distance then bog down...
  3. T

    Cam follower pickup adjustment

    Doing a link n sync on my 96 112 spl evinrude. For whatever reason I'm not understanding how to do this adjustment. Attaching the page from my service manual. Can sometime please clarify how to align the embossed mark with the center of the follower?
  4. T

    rebuilding carbs for the first time

    I have a 96 112 spl motor. I will be rebuilding the carbs for the first time this week. I've read over the procedure in the top secret file. Where can I pick up a jet removal tool? My concern is the adjustment after the rebuild. Can someone point me in the right direction for properly...
  5. T

    pontoon prop?

    I have a 20 ft pontoon with a 112 evinrude spl. It currently has a solas 13.5x15 3 blade aluminum prop. When running wide open the engine revs. I'm new to boating and don't know the correct terminology. Is this prop correct for my boat? I haven't taken the boat out since november but I'll...
  6. T

    Black oil leaking from behind prop?

    1996 Evinrude 112 SPL. I winterized my motor last month. I replaced the gear oil at that time. It was my first time winterizing a motor - could this black oil be from using too much fogging oil? :facepalm: I've read on other websites that it is most likely from unburned 2 stroke oil in the...
  7. T

    Does this prop need repair?

    My brother got the back of my pontoon hung on a small fallen tree, the prop grazed it. :facepalm: Here are pictures of my prop. Will it cause damage to the lower unit like this? Can the rough edges be filed down? Or would this have to be sent to a repair shop?
  8. T

    A couple questions about 96 112 SPL

    As I mentioned in my other thread about winterizing, I'm new to boating so I'm sure I sound like a complete idiot. Please excuse my ignorance. With that being said: I have a 96 112 evinrude on a 20' pontoon. My brother went into a cove and the water level suddenly dropped. The rear of the...
  9. T

    96 Evinrude 112 SPL Winterization

    This is my first year of boat ownership. I'm unsure of what steps are necessary to winterize my boat. I've read through other threads but some of the terminology is new to me since I've never done this before. I run star-tron in the gas on a regular basis. I last took the boat out on...
  10. T

    1996 evinrude 112 spl stalling when throttling

    I bought a used pontoon with this motor. Pre-mix gas 50:1. I don't know the history. When I got the boat we ran a can of sea foam. The problem started later that night, don't know if it was related to the sea foam. Next we changed the plugs, everything was greased, and the gear oil was...
Top