Search results

  1. Todd in NY

    1980 Evinrude 7.5 No Spark Bottom Cylinder

    As the title states, I don't appear to have any ignition in my bottom cylinder. The top one is firing as it should, and the motor doesn't sound off, but it's down on power. Question is, how do I know or diagnose whether I should replace the ignition coil (#34) or the power pack (#11)? Both...
  2. Todd in NY

    Boat pulls to the right on plane

    I was on a friend's boat last week and I noticed the boat wants to pull to the right if I let go of the steering wheel. It's a 22ft aluminum Crestliner with a 150HP Evinrude. He said he replaced the steering cable recently. I'm not sure what might be causing the boat to want to turn to the...
  3. Todd in NY

    4.3L Mercruiser quit running after a loud noise

    My friend was out in his boat yesterday to do some fishing. He had just got his boat up on plane when the engine made a loud bang and shut off. He could turn the motor over but it won't start. He had to limp back to the dock with his kicker motor. It sounded like it was running fine right before...
  4. Todd in NY

    Where does the driveshaft O-ring go? 1980 Evinrude 7.5

    I replaced the impeller on my 1980 long shaft 7.5 Evinrude, and my Clymer shop manual does't show me where to place the new driveshaft O-ring. When I disassembled the lower unit the O-ring was near the top of the driveshaft near the bottom of the upper splines. But there is no groove in the...
  5. Todd in NY

    OMC Cobra 5.0 stalls when shifting into gear, and squeals

    I've had the boat out 3 times this year (just bought the boat last month). The motor is only 2 or 3 years old and it just started giving me problems yesterday. It idles fine, but when shifting into forward or reverse it stalls, then it has trouble starting again. This is with a warm engine...
  6. Todd in NY

    1987 Trophy 2160 available engine sizes?

    It seems most (maybe all) of the 21ft Bayliner Trophy's came from the factory with a 4 cyl engine. But I see a few of the 21ft boats with 5 liter engines. I am wondering if these motors are stock or if they are upgraded from 4 cylinders. If they ARE upgraded from a 4 cyl, how much work needs to...
  7. Todd in NY

    Looking for opinions on a Chaparral 244 Fisherman

    I am considering buying a 244 Fisherman if it is still for sale this spring. Don't know what year it is or the asking price. Don't know the condition either, but it gets shrink wrapped every winter and appears to be well cared for. How long do the stringers, floor and transom hold up in these...
  8. Todd in NY

    My "new" 1974 16ft Sears Aluminum Semi Vee

    Just picked up a great fishing boat with a trailer and a 1973 Evinrude 25hp outboard. The boat model # is 286-61416. It measures 15'10" long by 65" wide, max load with motor is 950 lbs and max motor size is 25hp. I have to resize my photos before I can post them, which I hope to do tomorrow...
  9. Todd in NY

    Should my boat be faster than it is?

    I have a 19ft aluminum Sea Nymph deep V center console with a 1986 90hp Evinrude. The boat dry weight with 2 motors, including my 15hp Evinrude, is roughly 1450 lbs. The prop is 13.25x17 and is a 3 blade aluminum. The boat doesn't have a tach, so I don't know what RPM its running at WOT, but it...
  10. Todd in NY

    Need tips for catching lake trout and salmon on inland lakes

    I fish several smaller lakes in "upstate" New York that apparently hold lake trout, other trout, and salmon. I've fished for bass for over 40 years from the Mississippi River east with really good success. But what I can't seem to figure out is how to catch lake trout, other trout, and salmon on...
  11. Todd in NY

    15 HP Evinrude won't stay at higher throttle

    It's a 1992 model that I use for trolling on my 19ft aluminum boat. It will run all day long at slow setting, which pushes my boat along at 1.1 to 1.3 mph in 2-4ft swells. But when I turn the throttle up on the tiller handle it falls back to the low setting. How can I adjust it so that it stays...
  12. Todd in NY

    What are the biggest waves you encountered with your Sea Nymph?

    Just curious to see what you've encountered while out on your Sea Nymph boat. In my 14A Cartopper we have been in 1ft waves with no issues. It is powered by a 3.3hp Evinrude outboard. In my CC191 we have been in 2-3ft waves on a large bay with winds blowing 15 to 20 MPH with gusts up to 30...
  13. Todd in NY

    Where should the cranking battery be positioned?

    I have a 1987 Striper cc191 and the battery is on the floor behind the seat, kinda tucked up under the rear transom rail. I have seen a picture of a battery on a GLS 195 (?) with the battery placed back inside the bilge area, just starboard of the center of the transom. It looks like a better...
  14. Todd in NY

    Boat Handling Guide decal

    I have one of these decals on my helm, and it's about 4"x6". It's a nice reminder for boaters who are met with boating traffic and/or navigational markers that they may not encounter on a regular basis. I try to avoid crowded lakes and rivers because I don't like when other boaters act like they...
  15. Todd in NY

    1992 15hp Evinrude, what are the wires for?

    The model number is E15RLENM. It has 2 wires (red and black) that come from the front of the engine cover. I don't know if these wires are for charging a battery, powering running lights or electric start. It has a pull start, but there is a black button in place where the electric start button...
  16. Todd in NY

    Steering cable measurements don't match old cable numbers?

    I want to replace my Teleflex rack and pinion steering system with a new system. When I measure the 3 places that are shown in the sticky on this forum I come up with 14.6 ft. But the steering cable in my boat is marked SSC12418. According to the Teleflex web site the last 2 digits represent the...
  17. Todd in NY

    Which Teleflex Steering System Do I Need?

    1987 Sea Nymph Striper CC-191, I believe it has the original steering system, which has become very difficult to turn. I think its a rack & pinion steering. I looked at the Teleflex web site, which is now called something else (maybe Seastar systems?). There are too many to choose from on their...
  18. Todd in NY

    Need Help With Boat Wiring Please

    I have a some electronics that don't want to work. I bought a boat that sat for 2 years in the harsh northern NY winters. It runs great but I can't figure out why the following items don't work; Marine radio, fish finder, bilge pump, and the pump that fills the livewell. I've replaced every fuse...
  19. Todd in NY

    My "new" 1987 Striper CC191

    2 electric Canon downriggers, outrigger mast with 2 "Otter Boat" planers, 2 fish finders, marine radio, AM/FM CD player, new cranking battery, 24v 70 pound thrust trolling motor, Yacht Club roller trailer, many other extras. Has an 87 Evinrude 90HP VRO outboard. Haven't had her out on the water...
  20. Todd in NY

    Need info/help; bimini for Striper cc191

    I just bought an 87 Striper cc191. The previous owner took good care of the boat but the mice made several nests in the bimini top while it was stored for the winter in his shed. I have no idea if this top and side rails are complete or not. I don't know what hardware or straps I need to...
Top