Search results

  1. B

    Is my motor governed down?

    Last year I bought a brand new 2017 18ft pontoon with a 2017 Mercury 9.9 EPLT Pro Kicker. At WOT it's running 2800-3000 rpm. I looked up the specs of that motor and Mercury says it should 5000-6000 max rpm. Why am I only getting 3000? Is my motor governed down so as to protect it? Thanks Jim
  2. B

    Fishing Boat Rental Question

    I've noticed on the reservoir where I keep my pontoon docked there are plenty of guys fishing from the shoreline. No place near here rents small boats for fishing. I've considered buying an inexpensive boat (14ft aluminum type or the like), trailer, gas motor (9.9 or less), trolling motor...
  3. B

    Is it possible to install air valves to my logs?

    I want to get a bit more buoyancy on my boat. I thought if I could add valves I could do that. Thanks
  4. B

    Trailer Backing Issues

    This was my first season of boating and have had a blast in all respects except when backing up my trailer. I cannot keep that darn thing straight for nothing when backing up either in the ramp or flat surface. I drive a Chevy Trailblazer and my trailer is a 25ft EZ-LOADER, single axel with no...
  5. B

    Humminbird 100sx - Is it Junk o's Is It Me?

    My boat came with a Humminbird 100SX fish finder. I'm not a fisherman but I use it as a depth finder, or so I though. It tells me the water is 400+ ft deep when it know it's between 10ft and 60ft deep. Is that thing broken, junk, or am I doing good something wrong? I turn it on, it goes to...
  6. B

    What's It Weigh?

    My pontoon boat has a half pontoon about 7-8ft long in the center. How much do you think that thing weighs? Any guesses? 100 pounds? 300 pounds? 500 pounds?
  7. B

    VRO Question

    I have a 2001 Johnson 40hp two stroke that wouldn't start. Shop said carb bowls were full of oil. They cleaned the carbs, has good spark and compression, fires right and runs like a champ. He said the vro is slowly going out. He said it's about a $600 part. I see these on ebay ranging from...
  8. B

    Lightning - Am I Protected?

    I own a pontoon. The pontoons and frame are aluminum, the deck is wood, the seats are a blow molded plastic box with cushions attached. If I happen to get caught in a storm with thunder and lightning, if I pick my feet up off the floor, am I safe from lightning if it strikes the water?
  9. B

    Mercury 9.9hp to 15hp Carb Upgrade

    I'm considering upgrading my 9.9hp carb to a 15hp carb (Why? Because I can, lol) I'm having trouble finding part numbers. My motor is a 2006 2cyl 4stk Bigfoot and the serial number is OR014E559. Where do I find a compatible 15hp carb?
  10. B

    Newbie Prop Question

    I have a 2001 Johnson 40hp 2Cycle twin on a 16ft Sylvan pontoon 2 1/2 toon. The prop reads 12x11c. First, what is the 'c' and second, why can I not find those dimensions anywhere? The prop finder here on iboats lists 11 pitch but not 12 dia, and 12 dia but no 11 pitch. Cabela's lists a Solas...
  11. B

    Mercury 9.9 Bigfoot Kinda Loud

    My Merc 9.9 is kinda loud. It just the motor noise, not an exhaust noise or anything. It makes it hard to talk while under way. I noticed a Johnson motor I have has insulating foam inside the cowl. Should my Merc have that as well? It doesn't now. If not is there anything I can do besides...
  12. B

    Aftermarket Tilt/Trim

    I have a 2006 Merc 9.9 Bigfoot ELB with manual tilt. Can I add an aftermarket electric tilt/trim to that motor? I have the switch on the controls but that's all.
  13. B

    Is this worth the cost to repair?

    I have a 2001 40HP Johnson J40VLSIB. I was trying to get it to start yesterday. It didn't start and I think the carbs are clogged, but I'm now not concerned with that at the moment. As I was wrapping things up for the night I noticed an oil leak. It is where the lower unit meets the swivel...
  14. B

    Model Number Help

    J40VLSIB - J = JOHNSON 40 = HORSE POWER V = ???????????? L = 20" Shaft SI = 01 (Year - 2001) B = Model run What is the 'V'? According to the repair manual this should be a "P" for power tilt/trim, but mine is a "V" and I can't find what that is. Thanks Jim
  15. B

    40hp Johnson to 9.9hp Evinrude/Johnson

    My pontoon currently has a 2000 40hp Johnson with top mount OMC controls, elec. tilt/trim, gauges. Would the controls and ignition be compatible if I swapped it for an Evinrude/Johnson 9.9hp? Or atleast close enough with some minor changes I'm asking because I also have a Merc 9.9hp...
  16. B

    Which Prop? A Typical Question

    The only thing I know about props is they're round, they spin, and they make my boat go. That out of the way, I have a Merc 9.9 Bigfoot four blade prop on a 16ft pontoon. What prop can I put on that will get me the most speed? I know it won't be an offshore speed but I want as much as I can get.
  17. B

    Motor Swap Steering Question

    I currently have a 40hp Johnson that I may swap for my 9.9hp Mercury. I don't know the technical name of it but the steering rod that goes through the tube on the front of the motor - can I use the one from the Johnson on the Merc or are they different sizes?
  18. B

    A Couple of Mercury Quicksilver Control Questions

    First I have a 2006 Mercury ELB 9.9 mdl OR14E559 motor and Quicksilver side mount remote controls mdl 881170A12. 1) Should that shift lever move pretty smoothly or should you have to muscle it a bit? I have to give it a pretty good nudge when shifting which makes it hard to dock, especially in...
  19. B

    2000 Johnson 40HP Motor Value - What's it Worth?

    How do I find the value of this motor? Is there a guide somewhere? I have a 2000 Johnson 40hp 2-stroke, electric start, OCM top mount controls, power tilt/trim, prop, oil tank, fuel line, and 6 gallon fuel tank. I do not know the specifics of the prop. It has scrapes and scratches but is...
  20. B

    Stereo Replacement Issue - Aquatronics MS-205 to Boss MR1309UAB

    I'm replacing an Aquatronics MS-205 with a Boss MR1309UAB system. I'm having trouble mapping the wires. I mapped it according to the label on the Aquatronics and the manual for the Boss. I did NOT replace the speaker wires. I'd have to take the boat out of the water for that since they run...
Top