Search results

  1. roozterdvx

    Hard shifting and some grinding...

    '98 Mariner 225EFI This thing has had a hard shifting effort since I got it and I've been trying to track this down. I figured the pivot bushing under the powerhead might be bound up with crud/salt/etc. so i've been spraying the s**t out of it with penetrating oil after every trip, during...
  2. roozterdvx

    Beware, Stingray Hydrofoil.....

    Previous owner had installed a Stingray hydrofoil. I'm not a fan of these things but didn't feel the need to remove it until... I found a crack in the anti-cav. plate and after further inspection, a chunk of the plate was completely broken off on one side, and only held on by the hydrofoil bolt...
  3. roozterdvx

    Tilt/Trim shaft bushing?

    I removed the trim sending unit from the motor...broken and I don't have a trim gauge. While doing so, I noticed that the shaft/pin where the sender is mounted looks loose in the hole/bore. Is there supposed to be a bushing in there of some sort? I have the Mercury shop manual, and am unable to...
  4. roozterdvx

    Rule-Mate pump...pro's/con's?

    Any opinions/comments on the Rule-Mate pumps? Not the automatic pumps which spin the impeller every few minutes, but the ones with a built-in switch.
  5. roozterdvx

    Any Pro Sports owners out there?

    1998 Pro Sports 2550 CC, 1998 Mariner 225EFI O/B
  6. roozterdvx

    Macerator Discharge!!!

    Neighbor took his boat out this past weekend with his family, (wife, 2 kids). I guess he didn't get the chance to clean Sunday, instead did it yesterday. I came home from work and nearly crashed my truck...driving past his house, I look over and wave, he's in the boat scrubbing the seats, and...
  7. roozterdvx

    Bilge Pump Manufacturers...Opinions, Comments?

    I have used mainly Rule pumps in my boats and have heard/read some bad reviews about Attwood pumps. Any recommendations? I'm looking for low amp draw as well as capacity.
  8. roozterdvx

    Multiple Bilge Pump question...

    Is it possible to run 2, 1100gph pumps off of 1 float switch? I would like to set each one up to run on manual indepenently.
  9. roozterdvx

    Looking for a S.S. Transducer mount...Pic

    Looking for a stainless steel mounting bracket for a Furuno transducer like the one in the pic. Any ideas, sources? Thanx.
  10. roozterdvx

    What is considered "normal" for water pressure on Merc/Mariner 225

    What's considered "normal" for water pressure? Engine is a 98 Mariner 225 EFI. I just bought this boat recently and am going to install a gauge this weekend. The P/O said water pump was last changed spring of 2006, but the boat has only had approx 25 hours since. I am planning on replacing it...
  11. roozterdvx

    Trim Sending Unit Purpose.....???

    Going through this past weekend cleaning and doing maint. on the boat and I noticed the trim sending unit broken, (mounted on the top pin of the hydraulic ram). It's just barely hanging on there. I don't have a trim gauge, so can I remove the sender without any problems or does it serve some...
  12. roozterdvx

    1997 LXI 236 water pump for sink?

    Posting for a friend... 1997 Larson LXI 236 The sink in the passenger side/port side console water pump is not working. My buddy just picked up this boat 2 weeks ago and wants to repair or replace the pump but hasn't been able to locate it. Rather than tearing up the boat aimlessly, figured...
  13. roozterdvx

    98 225 EFI Controls are extremely stiff...

    Took the boat out Sun. and the controls are really stiff. Felt like I was going to break it right off the console at times to shift into forward from neutral. I took the cover off and tried to lube everything I could see in there but no change. Do I need a new control/shifter or possibly...
  14. roozterdvx

    Hate to start this but, which oil for 98 EFI 225...opinions?

    Like I said...I hate to start this....It'll probalby turn ugly...lol This is my first 2 stroke motor and I'd like your opinions.... 1998 Mariner EFI 225, what do you recommend for oil?
  15. roozterdvx

    1998 Pro-Sports 2550cc info?

    1998 Pro-Sports 2550cc.... any info? opinions? Specs? Thanx
  16. roozterdvx

    Diff. between 1998 Merc and Mariner 225EFI?

    What the difference between Mercury and Mariner? Opinions on 1998 Mariner 225 EFI? Thanx
  17. roozterdvx

    SeaStrike 240CC Info?

    Am currently looking at a 2000 SeaStrike 240CC. Any info. or opinions appreciated. Does anyone know if SeaStrike uses wood or all composite construction? Thanx
  18. roozterdvx

    How to check for saturated foam....?

    Newbie so bear with me... How can I check for saturated foam? I'm looking at a '93 Sportcraft 23 to buy, but want to check it out as best as I can. Was there a change in foam from open cell to closed cell and if so when? Any other issues to look for? Thanx
  19. roozterdvx

    93 Mariner 135 OB Opinions.....

    I've owned Merc 135 IO, and Merc 90 4 stroke OB....never had any Merc/Mariner 2 strokes. Pro's/Con's? I'm looking at a Pro-Line CC with twin 135's Thanx
  20. roozterdvx

    93 Pro-Line 230 Sportsman CC Questions....

    I'm looking at a 1993 Pro-Line 230 Sportsman CC and need some opinions on it... Anyone familiar with this model? Anyone got pics? Is there room in the console for access door and porta-potti?....(wife needs it, you know) Any help with specs, standard features, options... I haven't owned a...
Top