Search results

  1. soak 'n fused

    1990 Nissan 90 HP motor not running

    Hi all- just put a new battery into it and there is absolutely no power to the motor starter. I can get my bilge and running lights to work but there is absolutely nothing when I turn the key. I cannot get the trim to work either. Is there a fuse I am missing in the wiring or is there a reset...
  2. soak 'n fused

    1979 Searay SRV 240 shift cable bellows replace

    Hi all- Does anyone know of a link with a video on how to do this procedure? And what is the shop time for this job? This should be a Alpha outdrive, correct? The motor was replaced with a 1997 350 Merc.
  3. soak 'n fused

    Boat winterization

    Need to store the Nissan for the winter. Can I pull the plugs and spray fogging oil, treat the gas and disconnect the battery and that is good enough? Just had the lower unit gear oil changed so no need to do that. Any other advice? Of course, I will trickle charge the battery through the...
  4. soak 'n fused

    1990 Nissan NS90A carb problems?

    Hi all- Just had the three carbs rebuilt and before I went to start it I primed the bulb and gas started pouring out of the bottom carb. My mechanic has the manual but just wondering if a gasket wasnt torqued right or a float is stuck or a gas line gave. Has anyone encountered a problem like...
  5. soak 'n fused

    Help!! Power trim and tilt seal kit

    Hi all- I need to rebuild the power trim and tilt on my 1990 Nissan NS90A motor. I have searched high and low and cannot find the seal kit for this motor. I did find and have already gotten both the water pump kit and the carb kits for this motor from nissanoutboardparts.com but they said they...
  6. soak 'n fused

    1690BR Nissan boat w/NS90A motor steer issue

    Hi all- I pulled out my old steer cable and rack and now am not sure how to order or find. The cable is 11 ft total length but it looks like the rack does not come off. I need to find this part along with the 18 inch steering rod. Can anyone help?
  7. soak 'n fused

    1990 Nissan NS90 tilt and trim fluid

    I was told to use straight hydraulic fluid but cant seem to find it in anything smaller than a gallon. I was told also that you can use transmission fluid. Now I am soak 'n fused. lol Anyway, what is the power trim and tilt fluid got in it and what is anyone's opinion on this? Thanks and...
  8. soak 'n fused

    1990 Nissan NS90 tilt and trim fluid

    Can anyone tell me what kind of trim fluid to buy for this motor and how much does it need?
  9. soak 'n fused

    1990 Nissan NS90A carb rebuild

    Hi all- I am rebuilding the carbs and am looking for a thread on this procedure with the jet settings or just what the jets should be set at. How long should this take?
  10. soak 'n fused

    Water pump impeller kit

    I need to replace the water pump impeller on my 1990 Nissan NS90A motor. Can anyone tell me which one I am supposed to order? I dont see a category under the Nissan outboard section in the marine store.
  11. soak 'n fused

    Need steer cable

    I am looking for a steering cable for my 1990 Nissan 90 HP motor and Nissan 1690BR boat. Can anybody help or can anyone let me know how to get the old one out.
  12. soak 'n fused

    carpet replace

    Does anyone know of a good boat carpet to use? I have heard of people using cheap outdoor carpet but what do you use for glue? Can I use staples on the edges? Has anyone carpeted their boat? Any tips would be appreciated.
  13. soak 'n fused

    1990 Nissan 90 steer issue

    Hi all- While taking my final run last fall I noticed the boat would steer very hard, especially to the right. I had a friend manually help move it back and forth a few times and tried to grease the steering rod but it hasn't helped much. Is is possible I need a new steering cable? Does...
  14. soak 'n fused

    Trailer wiring

    Does anyone have any experience with the wiring on a 1991 Nissan Pathfinder? It has 2 wires from the drivers side and 3 from the passenger side. I have heard conflicting connection theories on this because I have a 4 flat plug to my boat trailer and I have 5 wires from my tow vehicle. I was...
  15. soak 'n fused

    Boat Scam?

    Hi all- About a month ago I ran across a website called American Boat Listings. It gave me the opportunity to list my boat for free. I then filled out a short form describing my boat, etc. A couple of hours ago I got a call from a Mr. Alan Burke who said he was from New York or Jersey and...
  16. soak 'n fused

    Trailer rust

    Hello all- My boat trailer is definitely showing some rust. I dinked around last year and used a drill with a wire brush to clean up some rust spots and put gray primer on. There are a ton more little spots everywhere and think it would be a pain to try to get at all of those what with wiring...
  17. soak 'n fused

    Any good boating lakes in Minnesota?

    Hi all- I live in the Twin Cities area and have been boating for quite awhile. I used to own a boat slip on the St. Croix river that I used to cruise in my 24 ft. Searay. I also took her to Lake Minnetonka but found the boating there is no fun on weekends because of too many boats, etc. I...
  18. soak 'n fused

    Need help with teakwork

    Hi all- I got my 1990 90 HP Nissan out the other day and boy did it run sweet. Need to wash and wax but right now I am turning my attention to my 1979 240SRV Searay. I have sanded down the swimdeck to where I want to put stain or oil on and then some spar urethane. Its been a few years since...
  19. soak 'n fused

    Oil change problems 90 HP Nissan

    Hello all- I recently bought one of those adapter kits from iboats for changing the lower unit gear oil on my 1990 90 HP Nissan outboard. Well I let my buddy use it to change his Mercury outboard and said it worked fine. When I went to do my boat I could not get the adapter to thread into my...
  20. soak 'n fused

    Bellows replace

    Hi all again- Ok i feel a little sheepish with my post the other day. Ok so there is no right or left... there is an upper and a lower and a small one in the middle and what i can see i guess it is the shift bellows. Anyway, it is cracked and needs to be replaced. What is this going to cost...
Top