Search results

  1. Chaney101

    Cleaning Carb

    Hey guys, This is my next step in my {No WOT} Compression is fine as is spark. Now I have got the carbs off, waiting on the new gaskets. Any input on how or what to watch for while cleaning. All I have is to spray every hole and hit with compressed air. Anything else to look for while I am in...
  2. Chaney101

    Fuel Pump !

    Could my fuel pump be causing my issue with not getting over 4000 rpm? Fine under no load. When I try to get up and go in the water it takes forever and only gets to 4K? Spark checked out fine.
  3. Chaney101

    Only one cyl firing in idle

    is this normal for only my top cyl to fire in idle. I thought at leat 2 were supposed to. 2003 Merc 90 elpto 2 stroke. Thanks P.S. Did this with timing light.
  4. Chaney101

    90 Merc no WOT!!!

    hey guys I was running at the chesapeake today. When I opened up the throttle in forward, the motor would not pass 4000 RPM. Neutral opens up fine as does reverse. I checked spark when I got home with a timing gun and changed plugs on the water. It takes forever to even get to 4000? Any help...
  5. Chaney101

    Thread

    I dont understand why this thread is not used more?
  6. Chaney101

    Planer Mast

    anyone know where I can get a dual planer mast cheap? Anyone got one for sale?
  7. Chaney101

    long Steady Tone

    heys Guys, 2003 ELPTO 90hp Had it out yesterday. At WOT i got a long steady high pitched tone. Guages looked fine and plenty of oil. Any input? I searched my owners manual and nothing.
  8. Chaney101

    2003 Merc Part Number

    Hey guys I cannot seem to find the correct part number for the fuel pump rebuild kit. Anyone have it? Thanks -Chris
  9. Chaney101

    Help please ! annoying cough or Miss !

    hey there guys, trying to prepare for my striper trip in two weeks. I was running my 2003 2 stroke 90 hp on muffs today. I noticed I could not get my rpms to idle down to 675. The lowest is about 800-850. Anyway, at about 2900-3200 rpm I am getting a horrible miss or cough every couple of...
  10. Chaney101

    NGK BUHZW-2

    OK, From what I researched this plug has something built in to prevent radio interferance. This plug is 3 times more expensive than BUHW-2. Is it safe to try the non Z to see if it causes any problems? Anyone have experience with this issue?
  11. Chaney101

    Spark Plugs !

    What sparkplug do you guys reccommend for 2003 Mercury ELPTO ? Thanks
  12. Chaney101

    Crazy RPMS

    Heys guys, 90 Merc ELPTO. Yesterday I went out with the SS Prop. My RPMS in the morning where 6100-6300. I kept is easy thinking I was underpitched with just my wife and I. By the mid to the end of the day WOT was 5800. This is got me stumped as to why this would be? Prop is a SS Quicksilver 13...
  13. Chaney101

    Hydro Foil

    Do you guys have any input to hydro foils as to whether they are worth the money and hassle?
  14. Chaney101

    Flush mount Rod holders !

    anyone know if it is possible to install flush mounts on a 2003 Tracker Targa. I know the gunnels are wide enough. i just didnt know if they were sturdy enough? Thanks
  15. Chaney101

    Mercury Stainless

    Hey guys how is everyone today! My question is... I just purchased a used Mercury Stainless Quicksilver for 90 Merc. Part # 48 72762 A5 19P Is this a good prop and what is the new model compared to? laser, etc... If you remember my rpms were 2 or 300 high. From what I have read this is cupped...
  16. Chaney101

    Michigan Wheel

    are these good aluminum props?
  17. Chaney101

    Prop Part #

    48 78122 A-40, 21P Hey guys will this fit my 2003 90 ELPTO?
  18. Chaney101

    Need Prop PITCH .. Help!

    This prop stuff is boggling my already A.D.D Mind. I have a 2003 Tracker Targa 17 with a 90 ELPTO. 30 Gallon gas tank. I generally have one other on board, two at the most unless tubing. I know when tubing I need to go down in pitch. Got that. I am currently running at 5700-5900 wide open rpm...
  19. Chaney101

    Targa - Tundra Owners !! Prop ?

    what size and brand props are you guys running ? Stainless or Aluminum ? What speeds ? I am running an aluminum 19 pitch and it seems the RPMS are too high. I am trying to step up to see if I can get more speed. I am running at about 42-44 Mph with a 90 Merc. 2003 Targa 17
  20. Chaney101

    RPM Question

    what should my max rpm be at wot on 90hp Mercury ELPTO ?
Top