Search results

  1. yfz450guy

    swap 125 with a 150?

    i found a 90ish 150 power head without carbs or starter. and i have a 88 125. can i swap just the power head and use my carbs and starter? if so i would need to change the jets in my carbs right? thanks.
  2. yfz450guy

    spark plug?

    hey all, what is the best plug to run in my 1988 force 125hp? i keep hearing different things from different people so i thought i would ask the experts.:confused:
  3. yfz450guy

    stator repair.

    anyone know if it is cost effective to the force stators repaired? i have 2 that need it. if you think it is then who can do it?
  4. yfz450guy

    1988 125hp idle rpms?

    i have a 1988 125hp and have been having an issue with power loss the motor feels as if it has a govener on it at wot. i have spark on all 4 and the comp is within spec. i heard from a guy to check the key switch so i did and it failed the final test in the manual. so i replaced it it ran better...
  5. yfz450guy

    i want more top speed please.

    i have an 88 bayliner 18' bass boat and an force 125hp. have an 13x19 and a 13x17. when i run the 13x19 i can get to 35 to 40 mph at 4500 rpm. with the 13x17 i get to the same mph but my rpm's are at least 6000 rpm's. any ideas as to how i can get more top speed?
  6. yfz450guy

    need more top speed!

    i have an 88 bayliner 18' bass boat and an force 125hp. have an 13x19 and a 13x17. when i run the 13x19 i can get to 35 to 40 mph at 4500 rpm. with the 13x17 i get to the same mph but my rpm's are at least 6000 rpm's. any ideas as to how i can get more top speed?
  7. yfz450guy

    overheat buzzer

    i got this boat and the over temp buzzer is not hooked up. how do i wire it into the system. thanks.
  8. yfz450guy

    force 125hp prop.

    i am looking for a 12.5 x 21 3 blade for my force 125hp. or a really fast 4 blade. i found a pirahna with interchangable blades, anyone heard of those? thanks.
  9. yfz450guy

    need some help.

    is there anyone in the vancouver, wa. area or within a reasonable distance that can lead me through finding the source of my misfire or lack of fire all together? check the timming and sync the carbs. basically help me figure out why this boat won't go over 40mph. thanks.
  10. yfz450guy

    force 125hp prop question.

    i have a 1988 bayliner bass trophy 18ft., force 125hp outboard, 13x 19 alum. prop, wot is 40ish at 4200 rpm. what can i do to get more top speed out this old girl? pics of vent plate. By yfz450guy, shot with Canon PowerShot A95 at 2007-09-09
  11. yfz450guy

    how fast should my boat go?

    i have an 88 bayliner bass trophy, 18ft., 125hp force, 13x19 3/blade prop. i am asking becuase i can't get the boat to go any faster than 38-40 mph. that seems low for as small as the boat is and how big the motor is. my rpm's are in the 4200 range. things i have done; fuel pump, plugs...
  12. yfz450guy

    volt meter / charging?

    i have a 88 125hp and i finally got my guages working. i noticed while at the lake today that the tach is reading at about 4200rpm at wot and the fuel guage is at 1/2 which should about right since i put ten gallons in this am. but my question is this.... now that the volt meter appears to be...
  13. yfz450guy

    prop interchange

    what if any other manufactures props will interchange with a 88 force 125? thanks.
  14. yfz450guy

    nu b with ?

    how do i tell which motor i have? the boat is an 88 bayliner bass boat and has a 125hp. (l-drive/ reg drive, pics?). how do tell which ignition system i have? pics?:redface: thanks in advance for the replies. i will post more questions as i think of them.
Top