Search results

  1. M

    Thanks - the 4-blades are great!

    Thanks to everyone who helped me by answering my prop questions in the spring (4-blade vs. 3-blade and related pitch questions). I ended-up buying two aluminum 4-blade props for my 3067 Carever Santego and they transformed the boat. I now get onto plane quicker, maintain that more easily, and...
  2. M

    Best 4-blade Props for Carver Santego 3067

    I have a 1989 Carver Santego 3067 (34ft - 11,500lbs). It has twin 5.7 - 260 hp. Mercuisers. It has a hard time getting on plane and will immediately fall off of plane when throttled back even slightly - even with trim tabs properly deployed and the drives all the way in. I was told that a...
  3. M

    Carpet Replacement - How Hard? Any Tips?

    I'd like to replace the interior carpeting in my Carver Santego. Can anyone give me any ideas as to if this is a job better done by pros. And if you've done it before, do you have any tips or insights. Information is appreciated as I don't want to start this job if the difficulty factor is too...
  4. M

    Freshwater Pump Difference High or Low Pressure?

    I'm replacing a freshwater pump for my boat that has three fixtures. I've seen a Jabsco pump #30610-0092 or -0292 that would work. One is considered high pressure and the other low. Everything else is the same on them, but one is slightly more expensive. What's the difference between the two...
  5. M

    Replacing a Freshwater Pump

    I have a 1989 Carver 3067 Santego. I believe my freahwater pump that supplies the faucets is burnt out. It no longer runs and may be due to a number of reasons. Prior to the failure, it would not stop running even though it seemed pressurized. Recently, my batteries drained and I've heard that...
  6. M

    Windshield Section Replacement

    When my used '89 Carver 3067 Santego was delivered to the marina last year after I purchased it, I discovered that one of the starboard sections of the windshield on the sedan bridge had shaken loose and blown away. I've searched for used boat parts and the Carver dealer doesn't stock anything...
  7. M

    High RPM but no speed

    I have a Carver Santego with twin 5.7 Mercruisers. The engines seem to run fine, but at times, I can't seem to get the boat on plane. The boat should comfortably cruise at between 20 - 25 mph, and I've had it up to about 25. However, there are times when I've got both engines spinning at 4,000...
Top