Search results

  1. F

    86 90hp v-4 no spark on one side powerpack?

    hello, Eng will not idle i checked for spark on one side and nothing, checked the other side good spark, switched the good power pack to the side getting no spark now that side is getting spark put other suspect powerpack on other side now no spark there, do you think i have a bad...
  2. F

    tach pulse settings for a v-4 90hp

    Can not remeber what the tach needs to be set at for a v-4 90hp eng, i currently have it set to 4 pulses. thanks
  3. F

    Speed with a 90hp on pontoon

    getting ready to switch out the 40hp on my pontoon with a 90hp v-4 what should i except for speed it is going on a 20ft harris floteboat sunliner, i usally get about 15-17mph out of the 40hp,a 90hp is what my boat is rated for anybody else running a 90hp? thanks
  4. F

    86 90hp starting on eng stand gas can need to be level with eng?

    Hello, I currently have my eng on a eng stand and was trying to start it over the weekend, couldnt get it to start, gas can was on the ground primed it up bulb got hard but would not start moved the can onto a ladder and started right up, my question is does the gas can have to be level...
  5. F

    Starter bendix sticking

    I have 86 90hp motor and the starter bendix keeps sticking on it, i would like to no if this is something i can fix, i was thinking of taking the starter off and removing the bendix and cleaning it out real good, or do i need to look at getting another starter, the only way to get the eng to...
  6. F

    1986 90hp with 84 carbs?

    hello, I have a 86 90hp i was looking at some carb rebuild kits for it, and the ones i ordered did not work, found out who ever owned it before me put carbs off of a 84 90hp on it and took off the vro pump and converted it to premix, is this okay to run with these older carbs????? thanks
  7. F

    1986 90hp flywheel nut size?

    Hello there would like to no if anyone happens to no what size the nut on top of the flywheel is i need to remove it thanks for your help
  8. F

    90 v-4 timer base stiff

    i have a 86 v-4 90 hp eng it seems like the timer base on it has gotten real tight on it i cant barley move it buy hand causing it hard to use the controls, would like to no if this is something i can fix, i am going to remove the flywheel and see what is going on under there has anyone seen...
  9. F

    2003 Johnson controls on a 1995 evinrude

    Hello i am new here but i have a question about the controls, i have a 2003 40hp johnson and it has the new style controls, i was given a 1995 90hp evinrude with the big red plug i would like to put this motor on my pontoon boat i no i cant use the current contols on it but i heard of a wiring...
Top