Search results

  1. 3

    1997 Mercruiser 5.7 Electric Fuel Pump Conversion

    Saw that one. The Carter A68301 switch has 1/8NPT threads so I won't need an adapter, and it has better reviews as well. Thanks for your help guys!
  2. 3

    1997 Mercruiser 5.7 Electric Fuel Pump Conversion

    The oil pressure switch included with the kit, only has 2 terminals instead of 3. Guess I need to get a replacement? Where would I find one?
  3. 3

    1997 Mercruiser 5.7 Electric Fuel Pump Conversion

    Need a bit of help guys. I understand needing the oil pressure switch to control power to the new electric fuel pump, and tying it in to the starter circuit, however this starter only has 2 terminals instead of 3. How can I work around this and still have power to the pump when the engine is...
  4. 3

    Starter Slave Solenoid

    There are 3 black cube relays on the starboard side of the engine, near the main wiring harness. Are you suggesting one of them could be the starter relay? Still can't post a picture. Thanks.
  5. 3

    Starter Slave Solenoid

    Already tried that. There are just too many other things in the way to do so. Tried to upload a photo, but it won't let me.
  6. 3

    Starter Slave Solenoid

    I've been hunting high and low and still can't seem to find it. Even changing the spark plugs on this engine would be a pain in the A$$!
  7. 3

    Starter Slave Solenoid

    Could someone please tell me where the starter slave solenoid is located on a 2013 Mercruiser 3.0 MPI? SN# 2A047409 Please tell me it is not on the backside of the metal bracket, just above the starter? If so, how does one access it? Thanks
  8. 3

    Engine Alarm / Wiring Diagram 2003 5.7GXI-D

    The engine side of the main harness has all the correct wires, however the boat side has only 8. From what I'm reading online, Four Winns offered the engine alarm as an available option. Why it would not have been standard is beyond me.
  9. 3

    Engine Alarm / Wiring Diagram 2003 5.7GXI-D

    Anyone know if 2 short beeps both before and after the engine starts is normal? Couldn't find the answer online. Thanks.
  10. 3

    Engine Alarm / Wiring Diagram 2003 5.7GXI-D

    So the alarm is now working. I ran a separate wire from the number 4 pin to a new alarm at the helm, with the other side to 12V purple wire at the volt meter. I now get 2 short beeps when turning the key to the run position, followed by 2 short beeps when the engine actually starts. I'm assuming...
  11. 3

    Engine Alarm / Wiring Diagram 2003 5.7GXI-D

    Thanks for the info guys. After looking at the main harness on the boat side, I have discovered there are only 8 wires instead of 10. The tan/black wire is not there, leading me to believe there never was an alarm on the boat. Guess I'm going to have to tap into the engine wiring harness, and...
  12. 3

    Engine Alarm / Wiring Diagram 2003 5.7GXI-D

    Hi guys, I've been trying to find out why there is no engine alarm when you turn the key on before starting the engine. I hear the fuel pump kick in, but nothing else. Engine runs fine, but no alarm. Is the alarm buzzer located somewhere near the helm? I cant seem to find it, despite a thorough...
  13. 3

    Safety Lanyard Switch for a 2008 5.0 GXI

    The new Sierra switch from Amazon fits perfectly.... Only problem is that it functions just the opposite from the original.... It's a closed circuit with the lanyard key removed, and with the lanyard key in place, there is no power to the ignition... :(
  14. 3

    Safety Lanyard Switch for a 2008 5.0 GXI

    I agree, it looks very similar. Can't tell if the hole size is the same.
  15. 3

    Safety Lanyard Switch for a 2008 5.0 GXI

    2008 20' Chaparral. Pictures attached.
  16. 3

    Safety Lanyard Switch for a 2008 5.0 GXI

    I bought a universal one similar to the ones in the link. It fits the mounting hole perfectly, however the cavity in behind is too small and it wont fit. The housing on the original one is smaller and rectangular in shape. Can't seem to find the correct replacement.
  17. 3

    Safety Lanyard Switch for a 2008 5.0 GXI

    I'm looking for a part number for a safety lanyard switch. Is anyone able to look this up for me? Thanks!
  18. 3

    Manifolds (Trying to figure out what I am looking at)

    Is one manifold getting more water flow than the other? This can happen if the thermostat housing is partially blocked with rust or other debris.
  19. 3

    Manifolds (Trying to figure out what I am looking at)

    This might sound crazy, but one of the byproducts of an internal combustion engine, is water. Have you ever seen dripping water and steam coming from the tailpipe of an automobile? Maybe the same is happening here, and because the manifolds / heads are new, it is showing up as rust on the fresh...
  20. 3

    EST1 Open

    The new gauge is reading high once the engine is fully warmed up, rather than low. As stated, both the engine ECM scan, and my laser temp gauge confirm this. My laser temp gauge is spot on. Something must be going on with the sender wire between the engine and the gauge. I may try running a new...
Top