Search results

  1. O

    Mercruiser Axius control system

    Hy Guys, due to my never ending search of "footage" i got stucked at a 2009 Bayliner model 300/315 which has the same width as my 285 SB, almost ;-) fitting to european street laws to carry on top of my truck. (just 2 1/2 inches in width to negitoate with whoever will start to claim...) Twin...
  2. O

    Rinda Diacom live data file

    OK, the rules in europe are giving me with my 285 bayliner serveral problems. 1st the weight: She has "ready for vication" a weight of round about 3,6 tonns (3.600kg) This is too much for a trailer (not for a trailer, it is too much for a SUV in front of the trailer due to brake force...
  3. O

    Rinda Diacom live data file

    I'm situated in Germany. My Bayliner is sitting with the z- drive towards the driver cabin of my 11 tonns truck. I cannot lower the bravo drive due to that it would hit the trucks frame. I have to do it this way due to rules and regulations of transportation weight and hight in europe. I am...
  4. O

    Rinda Diacom live data file

    Hi Guys, I just purchased the Rinda Diacom PC Software V 2.9.2 Now i'm playing around to get used to it before realy needed to find a problem which hopefully never occures ;-) Due to that my 285 Bayliner with a Merc 350 MAG MPI from 2004 is already winterized and sitting backwards on my truck...
  5. O

    What is this bore doing?

    Re: What is this bore doing? after a while of not beeing here... Still gamebling with my yamaha malta. The bore does not have a decompression function! It is done to get oil and or fuel (mostly oil) which can be collected in the crankcase burned and not let it directly drained into the...
  6. O

    too large prop cause damage in Z drive?

    Hi Guys, does a too large Prop pitch causes damages in bearings and/or gear wheels in a i.e. Alpha one Gen2 drive unit by overload (torque) or is it a bullshxx story??? Best regards Oliver
  7. O

    merc 5,0 mpi gives a double buzzer sound and stops

    Hi guys, i wanna halp a buddy of mine who yust startet with his 305 Bayliner into vication and gave me a call. Some miles of travelling he got a double buzzer sound from one of his merc engines (duoprop) the doulbe buzzer sound comes again one minute later and so on.This happend for a while...
  8. O

    What is this bore doing?

    Re: What is this bore doing? Much more difficult than it looks, but all for fun.
  9. O

    What is this bore doing?

    Re: What is this bore doing? As promised some pics: I am in re assembly and short before installing an additional NOS system (just to make sure that i will win the beer:D)
  10. O

    What is this bore doing?

    Re: What is this bore doing? There are 3 Ignition points on the Yamaha ??? I am too long out since tuning a 2 stroke... :eek: :D Two marks between wheel and housing looking like screw heads (the third one you have to immagine) the piston position according to the ignition... this one is...
  11. O

    What is this bore doing?

    Re: What is this bore doing? Thank you guys! Better a double posting than nothing :D I will be careful in porting, timing and open the width. If it goes worth i already bought a second Malta. If this fails again i'll get another one from internet. I'll test it in a water basin with a force...
  12. O

    What is this bore doing?

    Hi Guys, i do have a small sized 2 stroke outboard engine (Yamaha Malta 6L5 with 3 HP) for my dingi. By fun i did a bet against a buddy of mine who will have the faster Yamaha Malta next spring time. So i am tuning this small piece. (This is another story :D) My question hoped to be answered...
  13. O

    Marine Camshaft???

    Hy guys, i'm still working on my reversion problem. Got a brand new First Mate MARINE 5,7 roller camshaft longblock and assembled it with my "old" parts. The engine is still revesing water through the exhaust. I did change everything of the attached components. Manifold, elbow, reiser...
  14. O

    5,7 Mercruiser overheats

    Re: 5,7 Mercruiser overheats Block is cracked. All 3 crack lines in different cylinders goes horizontal. Just opposite a cooling channel. Probably there are more cracks but i didn't check. Thin red line above the red section is one of the cracks. I did hear the buzzer noise of the warning...
  15. O

    5,7 Mercruiser overheats

    Re: 5,7 Mercruiser overheats ... it helped... Fuc.. found water (with antifreeze) in cylinder #7 #7 was a little lower in compression than the others from the beginning on. Without sparking plugs i turned the engine by the starter motor. Some water sprayed out of #7. The sparking plug told me...
  16. O

    5,7 Mercruiser overheats

    Re: 5,7 Mercruiser overheats I did a leak down tester to check leak (valves and pistons) as well as for "bubble counting" gasket problems. Thats the gauge: Thats the 1mm reducer (0,04 inch) which goes between pressure gauge #1 and #2 I will use it comming weekend. See what i can find...
  17. O

    5,7 Mercruiser overheats

    Re: 5,7 Mercruiser overheats ... then put some additional liquide sealing onto the sealing papers, but not too much.. and put everysthing together, with the benefit that the impeller housing now can be scewed down with a force that the sealing will work. It could be THE or one of my...
  18. O

    5,7 Mercruiser overheats

    Re: 5,7 Mercruiser overheats Hi guys, i found a problem with the thread's of the screws for the impeller housing. It was impossible to lock these screws. The threads went down like chicken feed without using too much torque. I remember by unlocking this screws to get access to the impeller 3...
  19. O

    5,7 Mercruiser overheats

    Re: 5,7 Mercruiser overheats The 1st motor was a 5,7 from 1997 flat tappet but now it is an 5,7 shortblock from first mate marine with roller tappets. Distributor works by changing the rpm... Yes, see: OK, i will check again the outlet situation on the riser when the rubber hose is...
  20. O

    5,7 Mercruiser overheats

    Re: 5,7 Mercruiser overheats Hi Bond-O, I disassembled the lower unit, the cooler for steering all the way up to the heat exchanger. There is no dirt or other things beeing found. (exept one O-Ring from the flat sealing surface between upper unit and transum, but mine was still in there)...
Top