Search results

  1. scca vette

    New Prop for the Baja that we did a little work on to make it "different"

    We took one of my new props and one of my guys put a Satin finish on it except for the blade faces that I had him polish. We also added a little more cup and put a knife edge on the trailing edge you can cut paper with.
  2. scca vette

    Corvette Funfest!

    I know there is a lot of IBoat members that are also into corvette's and was wondering if anybody else on here went to the Funfest this weekend?
  3. scca vette

    Tilt / Trim Oil???

    All the oil has drained out of the resevour on my tilt trim pump do to me having it tied up out of the way when replacing the floor. I went to the local boat store today and they had Mercury brand oil for 9 bucks a quart. Is this what everybody is using or is there other brands / oils that I can...
  4. scca vette

    Mini Boat motors seen at a Swap Meet.

    I was walking through the swap meet at the Carlisle PA Corvette meet today and found these mini boat motors at one of the booths. I took some pictures to share.
  5. scca vette

    2 wires from controls, what are they???

    We completed a lot of the woring on the boat this weekend however there is 2 wires coming from the controls that go to the dash. Both wires are yellow with a red tracer. What do these control and were do they go? The 2 wires are together and in a cover coming out of the controls. Any ideas?
  6. scca vette

    Anybody from Greensboro NC?

    I was looking at a job in Greensboro NC and was wondering if anybody on Iboats lives around there? Is there some pretty good lakes to boat on or even maybe live on? Any input would be appreciated.
  7. scca vette

    new Water Press Gauge trade for??????

    When I purchased all the new gauges for my boat I bought "ALL" the gauges that were on the website, basically just clicked on all the different ones. Because I was paying 0 attention I now have a "WATER PRESSURE" gauge that I have 0 use for on my I/O. EDIT: A barter proposal is soliciting a...
  8. scca vette

    Boat trailer causing boat to crack???

    A friend of mine found some cracks on the bottom of his boat (see attached photo). I told him that he should get it looked at to determine WHY it is cracking. He had somebody look at it and they advised him that the reason the boat was cracking is because it was not support correct on the...
  9. scca vette

    Looking for some of these hinges!

    I am in need of 4 of these hinges for my rear engine cover. I will buy new ones if I have to however at 20+ bucks a piece I would like to find somebody that has some laying around they want to make a few bucks off of. I have attached a photo below as to what they look like. Thanks Phil
  10. scca vette

    Horn??????

    I am getting ready to wire in all the new dash and electronics on the boat. The only item that I failed to buy was a horn. I am going to be under the dash working and it is 20 years old so it is also getting replaced. The question is does it have to be a "marine" horn? I can buy about any...
  11. scca vette

    Made new dash panel inserts (pics)

    We cut out some new dash panel pieces and then replaced all the switches and added a few extras. We then covered it in yellow vinyl to match the boat and then lettered all the switches in gray to match the other color of the boat. Here is what the original dash looked like. Here are the new...
  12. scca vette

    Steering Wheel Adaptor Question!

    I have purchased a aftermarket wheel for the restore project on my boat however the factory wheel is just bolted to the the shaft that is keyed. I need to know is there a adaptor that I have to buy for the aftermarket to work? If so does Iboats sell it? Here is the wheel that I want to...
  13. scca vette

    Progress and NAMED THE BOAT!

    I was able to get the swim platform completed on the boat along with getting the name placed on the back. :D Here is what it looked like before with the not so nice exhaust work that the previous owner came up with. After removing the truck exhaust, new hardware and speakers mounted this is...
  14. scca vette

    Made progress on the BAJA rebuild.

    Well no sooner did I get it home and I started tearing into it to see what I have and what I need. First thing was to remove all the decals and window tint along with cleaning all the crap out of it. This took the entire first day. Second was to do some cleaning and checking on how much work I...
  15. scca vette

    Few things completed on the BAJA today!

    I decided to do a few cosmetic items today so I could feel like I was getting something completed. Old light New Light Old Chrome Vent! New black vent and made a new Islander 216 decal. Went with a different font than what was original. I am considering a logo on the side of the boat that...
  16. scca vette

    Where to get 1 1/4 fuel fill hose?

    I am getting ready to put the floor back in the boat and found the fuel fill hose is in really bad shape. I checked all over town and the cheapest I could find a 8 foot section was around $125 bucks. Has anybody replaced this hose and if so what did you use and where did you get it?? You can...
  17. scca vette

    New dash is completed!

    I finally got my new dash completed now just need to find time to get it put in. What does everybody think? OLD DASH~ NEW DASH!
  18. scca vette

    Few things completed on the BAJA restore!

    Being gone for a week I did not have much time to get anything completed on the boat however today I was able to get a few things completed. Completed flooring install and sealed the floor. I then painted the engine area and bilge paint. We are going to add some color to it later, I will post...
  19. scca vette

    Visited Lake Mead!

    For those of you on here that live in Nevada and are able to boat on Lake Mead I have to say I am jealous. That has to be the most beautiful lake I have ever seen.
  20. scca vette

    Hummingbird LCR 2000 should i use it or?

    I was at a auction and found a fish finder (new) than I ended up buying for 50 bucks. We used it last year 2 times on a friends pontoon and it seem to work decent considering I have NO clue how to work the stupid thing. I was considering using it on the Baja however I have never nor will I ever...
Top