Search results

  1. N

    1990 40 hp evinrude. won't go over 2500 rpm.

    i have a 1990 40 evinrude (VE40TLESR) won't go over 2500 rpm. even when i put it in neutral still not going over 2500 rpm. acts like its bouncing off a revlimiter. need help. thanks guys. checked fuel and all is good. could be bad stator??
  2. N

    vovlo 5.0 GL PWTR

    The Engine Starts In The Key On Position. Not Key Cranking Position. Then The Starter Is Still Engaged To The Flywheel. I Disconnected The Engine Harness From The Boat And Started The Boat And Still Starter Was Still Engaged. Put A New Starter Solenoid On And Still The Same. Tried A New Key...
  3. N

    3.0 L Float Height Help

    I'm Working On A 3.0 With Digital Ignition. I Have Already Rebuilt The Carb And Put The Float Height To Spec. The Time Is At Spec Also. The Problem I'm Having Is That It Bogs Down Then Picks Up. Acting Like Its Getting Flooded Out Then Accelerates. The Motor Has New Plugs, New Fuel Pump. Do...
  4. N

    3.0 L Float Height Help

    I'm Working On A 3.0 With Digital Ignition. I Have Already Rebuilt The Carb And Put The Float Height To Spec. The Time Is At Spec Also. The Problem I'm Having Is That It Bogs Down Then Picks Up. Acting Like Its Getting Flooded Out Then Accelerates. The Motor Has New Plugs, New Fuel Pump. Do...
  5. N

    Vro Problem

    1998 50hp Evinrude. The Vro Pump Is Pumping Way To Much Oil. The Bowls Of Both Carbs Are Full Of Oil. Is There Any Way To Test The Pump? Or Do I Just Need To Order A New One?
  6. N

    constant beep under dash of 08 bayliner. 3.0L

    the owner said he crossed the battery terminals and he heard a loud pop. i have power to my starter, to my 50 amp breaker. i don't have any gauges working with key on. key off the beeps are still continuous. all my fuses are good. any help would be good. thanks nick
  7. N

    replacing freeze plugs

    i need some advice on the easiest way to change out a freeze plug on a 5.0 mercruiser motor. the motor is still in the boat.
Top