Search results

  1. W

    JOHNSON 150 NOT FIRING ON ONE CYLINDER

    I have a 1990 Johnson 150 GT.It was not getting fire to #2 cylinder.I replaced all the coils and still no fire to #2.Compression is 95 on all 6 cylinders.I installed a new power pack(guy at marina said thats what i needed) and still no fire on #2.I installed new trigger and stator and still no...
  2. W

    evinrude 150 fuel problems

    on an evinrude E150TLCOS that has vro/fuel pump with vacuum switch 0394937,does the vacuum switch have to work in order for the fuel pump to pump fuel? since this vacuum switch is obsolete,is there a replacement that can be used? it will run as long as you pump the bulb.take the gas line going...
  3. W

    1985 150 compression

    Does anyone know what the compression should be for a 1985 150 evinrude #e150tlcos? I was told this particular motor came out with only around 100lbs compression.is this true? I tested the compression and got 75-80 on all 6 cylinders.is this okay or should it be more? If this is ok fine but if...
  4. W

    1985 evinrude fuel problems

    I have a 1985 evinrude 150,model# e15tlcos.the problem is the bulb wont stay pumped up.it will idle or you can rev it up but it dies as soon as the bulb goes flat.i`ve replaced the bulb,rebuilt the carbs,replaced the filter.could this be a vro problem or am i overlooking something? The vro on...
  5. W

    150 Mariner Compression Loss 2 Cylinders.

    I Have A 150 Mariner.went To Lake,started Right Up,wot And Started To Plane And Then It Started Making A Knocking Sound And Died.started It Back Up And Still Knocking But Got Back To Ramp.got Home And Checked Compression.1 And 2 Cylinder Have No Compression.the Other 4 Have Around 115.what Would...
  6. W

    50hp evinrude 1988

    I Have A 1988 50 Evinrude That Had Been Sitting.i Bench Mounted It,hooked Up The Muffs And It Started Right Up.while Running,one Of The Wires From One Of The Coils,which Was Corroded And Bare In Spots,touched The Engine Housing Immediately Killing The Engine.now There Is No Spark.would This Have...
  7. W

    150 Mariner Problems

    I Have A 150 Mariner That Starts Right Up.With The Ear Muffs On It Idles Perfect And Revs Up Perfect.When I Put It In Water It Just Wont Go.compression Is Good,spark On All 6 Cyl. When Its Under Load It Just Wont Go.The Prop Was Changed Recently.Could This Be The Problem Or Should I Check...
Top