Search results

  1. C

    1961 johnson qd22 mid section 10 hp

    On the lower end of the mid section there are 2 holes. When the motor is running, should there be any water coming out of these holes? Note that these holes are in the area that the drive shaft goes up from the lower unit to connect to the power head.
  2. C

    johnson paint

    anyone know the paint code for a 1961 johnson 10 hp. the white paint is the question.
  3. C

    identify a Johnson power head

    When identifing a 1961 10 hp johnson, you look at the tag riveted to the transom clamp on the left or port side of the motor. In the case of the engine I have, the model number is qd 22. The serial number also starts with 22. On the power head, the serial number is also stamped into the freeze...
  4. C

    torque spec

    what is the torque spec for the cylinder head bolts on a 1961 johnson 10 hp engine? another question is are the cubic inches of a 1961 10hp and a 1961 18 hp johnson the same?
  5. C

    1961 johnson 10 hp wont start

    A couple of weeks ago I put up a post about this condition. The bottom line was the fact that the fuel pump gasket was sucking air. I made a new gasket and started right up. Thanks to the guys who replied and the help.
  6. C

    Steven CD -77 Peak Reading Volt Meter

    I have a Stevens Model cd 77 peak voltage reading meter for diagnosing cd magneto systems. It is brand new and never been used. I bought it for my 1988 225 evinrude which I sold in 2002. List price is about 250 and dealer price is about 200. Any reasonable offer would take it. Anyone interested...
  7. C

    1961 10 hp johnson wont start

    I havechecked compression. 75psi in both holes. yes it is a little low but equal. Carb has been overhauled. When reassembled, both idle screw and high speed screw were set to 3/4 and 1 1/2 turns out. I have good spark. spark will jump aprox 1/4 inch on spark testor. I pulled out plugs,j4js,and...
Top