Search results

  1. S

    Mating a Ford 351 to Mercruiser Outdrive???

    I'm replacing my Chev 305 with a Ford 351 and was wondering what I need to do to mate with my existing Mercruiser outdrive. Will a OMC bellhousing bolt up to a Mercuiser and what spline coupler would I need?
  2. S

    1984 Envirude 60 hp idle jetting

    I was wondering if anybody has changed there idle jets leaner, if so are they air jets or fuel jets as far as going bigger or smaller. My motor loads up at idle after 5-10 minutes and I thought I would lean it up a bit.<br />Can I get different jets at my dealer?
  3. S

    86' Evinrude 60 hp 2 cylinder?

    Does anybody know if they made one in 86'? I need the 60hp decals to replace my 86' 40 hp decals. Does anybody know where I could get those, I checked my dealer and they said I couldn't get them.
  4. S

    Idle Timing for a 84 60hp

    Anybody know what the timing should be at a idle for a 84 60hp? The reason I ask is the rod that links the carb to the stator assembly was bad and I need to adjust it now.
  5. S

    Please read I need a few answers!!

    I have a few questions I hope you guys can help me on. The motor is a 84 Evinrude 60hp.<br /><br />1.How far does the lower unit have to be in a barrel of water to pump? Is it the same holes you would put the rabbit ears on or the holes above those?<br /><br />2.How do I adjust my timing as far...
  6. S

    Where's my idle jet on 60hp Carb?

    Does anybody know which jet is the idle jet on my 84 Evinrude 60hp? Is it the one right above the throat of the carb like my manual says or is it the one where the carb bolts to the intake like the Evinrude dealer said? The reason I ask is I put Boyesen reeds in and I need to jet it richer.
  7. S

    Need help finding 60hp Carb

    Does anybody know where I can get a carb for a 1984 60hp perferably used. Mine has a bent throttle shaft and the dealer can't get just the shaft. My carb # is 394809....Thanks!
  8. S

    Where do you find carb jets for Evinrude's

    I just put in a pair of boyesen reeds on my 84 Evinrude 60hp and it said to richen the idle circuit. I went to my evinrude dealer and they said all they can get are the stock sized jet. Does anybody know where I could get a couple?
  9. S

    84 Evinrude 60hp carb throttle shaft

    Does anybody know where I can get one? Mine is bent.
  10. S

    Where to buy 86' Evinrude 60hp Motor Decals?

    Does anybody know where I could get the decals I just want the 60 hp decals. Also what whould the T stand for in the model# in place of the E for electric start which it has....Thanks
  11. S

    How do they gain 20 hp between the 40hp and 60hp

    My question is if the bore and stroke are the same between a 86 40hp and 84 60hp and the pistons have the same part# and the carbs take the same rebulid kit, how do they make 20hp?
  12. S

    40hp and 60hp Powerhead interchangeable ?

    Does anybody know if it's possible to put a 84 Evinrude 60hp powerhead on a 86 40hp outboard?<br />Bolt pattern the same, ect.?<br />Thanks!
  13. S

    Will powerhead fit?

    I was wondering if anybody new if I could take a 86 Evinrude 60hp powerhead and put it on a 87 40hp motor. Also is there anyway to run a motor without the lower unit, to get it to pump water?
  14. S

    Will 40 hp Evinrude lower unit fit a 60hp Evinrude

    I was wondering if anybody new if a 1987 evinrude 40 hp lower unit will fit a 87 Evinrude 60hp?<br />Also is there any was to put the newer style trim and tilt on the older motor?<br />Thanks.
  15. S

    Shifter Contol Box (What year do I need)

    I'm going to put a 1997 Evinrude 50hp on a 1986 Alumacraft and need to know what year control box I need. The motor also has power trim.
  16. S

    Swapping 97 Evinrude 50hp for 86 40hp Evin. and need info on oiling mods.

    I have a 86 Evinrude with VRO and was wondering what I would have to do to the oiling system to put on a 97 Evinrude 50hp. I read that they use different pumps? Any help would be great.
Top