Search results

  1. B

    '79 Evinrude powerhead interchangeable with '81 Johnson?? 25hp

    I'm going to do some research, but thought I would ask in case someone could answer quicker than me searching around:D I've got a 1981 25hp Johnson. It's starting to get a bit of a knock at WOT...probably needs a rebuild. Was wondering if a 1979 Evinrude would be interchangeable as far as the...
  2. B

    Torque spec flywheel nut 25hp Johnson?

    I was wondering if anyone knows the torque rating for the big nut that holds the flywheel on?? 1981 25hp Johnson. Do I just slide the flywheel back down over the key slot and tighten the nut?? Thank you!
  3. B

    Crank seal help.

    Trying to change the upper crank seal on a '81 Johnson 25 hp. I've searched a few posts and found some info, but was wondering if there are any tricks to getting the seal out?? I found a special tool online for $125 which is a little more than I want to spend...the marine shop said it would be...
  4. B

    Removing flywheel nut 25 hp Johnson.

    I've got an '81 25hp Johnson that I am wanting to pull the flywheel off of. Is there any trick to getting the nut off the flywheel without using an impact wrench? Maybe a strap wrench? Just wondering what you have tried. Thanks!
  5. B

    Changing crank seal 25hp Johnson

    I've got a '81 25hp Johnson. I may have a fuel leak coming from the crank seal under the flywheel. Just wanting to know how tough of a job it would be to change the seal? After I pull the flywheel what has to be done? Thank you for any info!
  6. B

    Fuel leak '81 Johnson 25hp

    I've got a fuel leak on my '81 25hp Johnson. It appears to be coming from up underneath the flywheel somewhere. Any ideas where the fuel could be coming from? The fuel line from tank/fuel pump/carb are good. Is it an easy process to get the flywheel off? Do I need a puller to get the nut off?
  7. B

    1981 25 hp Johnson help.

    This winter was the first time digging around on my 1981 Johnson 25 hp motor. Never worked on a 2 stroke before so this was all new to me. I took the pull cord assembly off the top of it, pulled the carb off, changed a crusty fuel line, installed a new water pump, fixed a broken bracket, and...
  8. B

    First time water pump 25hp Johnson

    I am going to attempt a water pump change on my '81 25hp Johnson. I've got an original repair manual to help me through it. With the shift linkage, do I just take out the bolt shown in the pic? Does it matter what gear the motor is in when removing the bolt/nut? Reverse seems to give me better...
  9. B

    Sierra vs. Mallory??

    I've got an '81 25hp Johnson that I am looking to tune up a bit. I am planning on getting a carb kit, water pump kit, and fuel pump kit. Just curious if there are any differences between the Sierra and Mallory kits? How difficult is it to rebuild a carb? Any info. would be great. Thank you!
  10. B

    25hp Johnson vibration.

    The fall of '08 I started getting a vibration and a knocking sound coming from my 25hp Johnson. I took it in to have it tuned up during that following winter. The guys at the shop told me the motor was getting worn out, but that Johnsons will run that way for a long time. I used it all last...
Top