Search results

  1. J

    evinrude stator problems?

    1975 Evinrude 75 hp 3 cylinder engine. When you first try to plane up under a load at the very high end of the throttle it will develop a shake. If you climb slowly, it will go all the way to full throttle. I have replaced the power pack, and the rectifier, and the coils. I have been...
  2. J

    Evinrude control Box problems

    1975 evinrude 75 hp 3 cylinder. The control box is also 1975. This engine is seriously trying to go to the bone yard:mad: The control box, when I bought it, would skip the gear that controls the shift/throttle controls. I replaced the one arm that I could (the other is no longer available)...
  3. J

    Evinrude 75 horse WOT problems

    Ok, 1975 evinrude 75 horse power 3 cylinder. VEEERRRYYY interesting problem here and I need some help. The engine starts and runs fine. In low RPMs it has no problem. you move the control box down to WOT, and it develops a shake. Will not gain power like its missing or something. Back...
  4. J

    1975 evinrude Rectifier Issues

    Ok, so I have a 1975 evinrude 75 Hp engine that idles fine, and at low RPMs works fine. but when you rev it up to plane at the very high end of the rpms it develops a miss. If I babysit it and slowly feather it up, and I do mean slowly, I can get it to climb all the way up to its high RPM...
  5. J

    1975 Evinrude 75 HP ignition coil question

    OK, So I just bought the new CDI ignition coils because I am not impressed with the replacement parts provided by Johnson/Evinrude. The part number is CDI 183 4632 and it says it replaces 502890 ignition coils, which is what I have. It says it does this on four cylider engines, but mines a...
  6. J

    evinrude ignition system questions

    I have a 1975 Evinrude 75 Hp 3 cylinder outboard. I have just a couple quick questions. What is the spark gap on spark plugs for this engine supposed to be? And on the coils, I just replaced them but am not happy with the new ones. The spark plug wire where it "taps" into the coil, you know...
  7. J

    75 hp Evinrude Fuel delivery problems

    You guys have helped me so much, and I appreciate it. But this motor keeps giving me problems, so please, a little more help. Once again I have a 1975 75HP Evinrude Hustler. I had a little trouble with the timing, but I think I got that fixed. the flywheel had sheered the key, so I fixed...
  8. J

    1975 evinrude timing questions

    Hello, I have a timing question. So the motor is a 1975 Evinrude 75Hp Hustler 3 cylinder. The motor is slow to plane and as it comes up it revs up/bogs down. The fuel system is completely rebuilt and the spark is good and hot. So, I'm leaning over the water while another driver revs the...
  9. J

    Evinrude WOT/RPM Problems

    Ok. I have been running a thread with Daviet and Levi_tsk helping me for a while now, but I feel I need to open a new thread for this one. I have a 1975 Evinrude Hustler 75 HP. Now, she starts and idles ok, will shift and run in gear OK. However, when I open the throttle the motor climbs...
  10. J

    75 evinrude carb adjustment

    I have had a long journey with this engine, and I have another question. It is a 1975 Evinrude 75 hp Hustler. The engine would idle fine in driveway, but I took it to the lake, and it wouldn't run. So I took it home, and found out it was only running on 2 out of 3 carbs. tested compression...
  11. J

    75 evinrude 3rd cylinder not firing

    Alright, I have been racking my brain here, and I need some help. Third cylinder (as in third from top) is not firing. The Evinrude is a 1975 hustler 75 HP and it idles great on two cylinders...In the drive way. Took it out to the lake, it won't stay running. So I took it home, ran...
  12. J

    interlux perfection orange peel problem

    I have just started spray painting with interlux perfection and found out after putting down two coats of lauderdale blue that I am using the wrong size tip and creating an orange peel texture. So being one to want to do things right, i went to start sanding down the orange peel texture to try...
  13. J

    16' fiberglass hull painting questions

    Hello, I have completely rebuilt the inside of my chrysler '77 tri-hull, stringers and everything. I now have decided to paint the outside of the boat i am not daunted by the work, in fact I love it. Just was wondering how far I have to sand down the topside and hull to repaint. How far is...
  14. J

    evinrude pt&t bleeding question

    ok, I know that the bleeding down question has been asked a hundred times, so I'll go right to my problem. I found out that my power trim bleeds down on my 1975 evinrude hustler 75hp, and so I came to these lovely forums and started my trip to hell and back. I started with the check and...
  15. J

    1975 Evinrude power tilt and trim question

    Hello, I am a new member to the forums. I just bought a 1974 Chrysler tri-hull with a 1975 evinrude 75 hustler from a friend for pennies and I now am in the process of rebuilding it from the stringers up. I have been reading forums on this site for some time now and decided I might finally...
Top