Search results

  1. G

    150 Mariner tilt and trim

    150 mariner tilt and trim we just bought a 150 mariner and the tilt and trim don't work the serial number is 6466159 were can we get a wiring diagram sorry for the upper post
  2. G

    evinrude 2400 trolling motor

    I broke the steering cable what i need to know is were i can get a new one .i hope i posted this in the write place if not im sorry
  3. G

    1978 evinrude

    I got a foot off my old 78 115hp evinrude motor and i was wondering if it will fit my 84 Johnson 90hp if not it is going on craigslist thanks
  4. G

    1984 90hp johnson fuel problem

    Driving a boat, it runs good for about a minute, ive rebuilt the carburetors, changed the fuel lines,. The previous owner took the vro off and put a regular fuel pump on it. I thought the fuel pump might be bad, so i took the fuel pump off my 1978 115 hp evinrude and put it on and no change. Im...
  5. G

    90hp johnson

    Could somee one please tell me the year model# is j90tl crd
  6. G

    1985 90hp johnson compression ?

    I went and looked at a 1985 90hp johnson to buy the compression was 120 on the left side 100 on the right the motor not ben in the water in 2 years so should i pass this one up or buy it
  7. G

    High Idle

    I have a 115hp 1978 evinrude. compression is right at 115 per cylinder. I've rebuilt the carbs, and replaced the water and fuel pump. It runs at 56-57rpm at wot. After wot and i let the gas off and i come to idle it idles at 21 rpm. Now for a minutes it will idle at that and then goes back...
  8. G

    omc or mercury

    i have never owned a mercury only omc.i found a basstracker that has a mercury dont no nothing about them.so what i'm asking are the motors any good or should i stay with jonhson/evinrude
  9. G

    Exhaust not coming out of prop

    I have a 1978 115 evinrude 115hp. After alot of work and getting the boat to run right i have noticed exhaust is not coming out of the center of the prop. Am i right or wrong but i think it's suppose to. Any help please.
  10. G

    why do repair shop rip you off

    I got a 115 evinrude that was hard to start i got fed up took it to a repair shop first thing they did was a compression 1t was 113 on all cylinders so now im told i need a new motor cuz it should be 125 or better i now better than that.and then tells me he can get me a good one for 1800 now...
  11. G

    Downsizing motor

    I currently have a 1978 115 hp evinrude, and i'm thinking about going down to a 1977 70 hp evinrude. The 70 hp does not have tilt and trim, but my 115hp does. The tilt and trim on the 115 hp came off a 1983 with a 2 wire system. Could i put an '83 70hp tilt and trim on the 1977 70hp? My...
  12. G

    1978 evinrude 115hp slow to accelerate

    i have a 1978 evinrude 115hp that is slow to accelerate. Compression on all cylinders at 110. Carbs been rebuilt, it has a new fuel pump, new plugs, drained the gas and put new in, new fuel lines, new fuel filter. At first start it floods itself out and i have to pull the hood off and...
  13. G

    1978 evinrude 115hp won't run right

    I have a 1978 evinrude outboard 115 hp. I have rebuilt the carbs, replaced all the fuel line, put a filter on it and drained and replaced all the gas with new gas/oil. I have also put new spark plugs in. I put new hose clamps on all my fittings to ensure no air leaks. All cylinders have 110...
  14. G

    1978 evinrude 85hp not getting full power

    I was going down the lake at full speed and the engine was running perfect. At the snap of a finger it was like it cut down to half power, and it was at full throttle. It has new fuel lines, new bulb, and new filter, but the engine still runs perfect in idle. At take off it has a little...
Top