Search results

  1. Cannondale

    2000 Johnson 115hp...am I close or can I stand more pitch?

    I've got a 2000 Javelin 17 Venom fish 'n' ski with a 115hp Johnson (looper). The engine sports a Raker stainless prop, 13 1/2 x 20. When the boat is fully loaded--with two on board (wife and self), fishing gear (poles, tackle boxes, etc.), ice chest w/16# of ice, and full tank of gas, which is...
  2. Cannondale

    Where to mount transducer on stepped hull?

    Howdy y'all! I've got a 2000 Javelin 17' F&S, which has a stepped hull. Trying to mount the rear transducer for a Hummingbird 598ci HD SI. But there is an issue...maybe. Or maybe I'm just too old to figure it out. ;) Hummingbird, in the unit's install instructions, states that the...
  3. Cannondale

    OK...completely confused about a Mrecruiser 3.0LX year of manufacture....

    Bought a 1991 Sea Sprite, 17', that has a Mercruiser 3.0LX I/O in it. Engine's quite clean and such, just have some confusion about the specific year of the outdrive/transom mount/engine itself. First, since the boat was a 1991, I figured the motor was, too. But, after crawling all over the...
  4. Cannondale

    Just another "Can I tow it?" thread....or am I going to hate life doing it?

    Re: Just another "Can I tow it?" thread....or am I going to hate life doing it? Re: Just another "Can I tow it?" thread....or am I going to hate life doing it? Thanks to everyone's replies.....I ended putting off the trip until this week, thankfully. While I have little experience driving in...
  5. Cannondale

    Just another "Can I tow it?" thread....or am I going to hate life doing it?

    OK....I have to tow an early 1990's 17' Sea Swirl open bow runabout w/a 3.0L Mercruiser I/O from Milwaukee, WI to Cape Cod with a 2004 Nissan Murano w/AWD. The boat as it sits right now, with empty gas tank and drained engine, weighs in at around 2400# and the Murano has a rated tow capacity of...
  6. Cannondale

    Looking at this boat, a 1960 Thompson Seacoaster....woulc you buy it?

    OK, I'm going to go look at this boat tomorrow and wonder what I should be looking for....I've not tried to evaluate an older wooden boat. It's a 1960 Thompson SeaCoaster, 16', with a 1970 Johnson 50hp on the rear. Any advice outside looking for the obvious rotten wood? Or, in other...
  7. Cannondale

    An oldie but goodie......the Wife's Diary

    Wife?s Diary: Tonight, I thought my husband was acting weird. We had made plans to meet at a nice restaurant for dinner. I was shopping with my friends all day long, so I thought he was upset at the fact that I was a bit late, but he made no comment on it. Conversation wasn't flowing, so...
  8. Cannondale

    Painting over Glubit......what works?

    Had to seal a tin boat from the exterior with Gluvit and it needs painting now....as we know, no UV protection in Gluvit so needs painting. So, what type/brand of paint has worked successfully for anyone who's done this? A rattle can paint is a bonus. Thanks!
  9. Cannondale

    Just curious....seeing several Bass Pro Shops DO NOT WANT posts....why?

    I've seen more than a few posters around who emphatically state they'd never buy a single thing from BPS. My question is why? Outside their sometimes higher prices for some items (which is why comparison shopping is good), I have yet to have a negative experience what so ever from BPS...
  10. Cannondale

    What is wrong with most of the people selling boats these days?

    So, we're looking to downsize our boat. Trying to find a fish and ski type boat of around 16' and lowish horsepower motor....under 100hp. I've spent now three days calling dozens of people about their boats and the level of ignorance of these sellers about their boats is just staggering...
  11. Cannondale

    1987 Evinrude 110 HP OB....anything specific to look for in it?

    Going to look at a boat Friday that has a 1987 Evinrude 110hp motor on it. Anything specific to this motor to check/watch out for, like the VRO system (no experience with that at all!) I do know to check compression, lower unit for water intrusion... ;) Many thanks for any suggestions.
  12. Cannondale

    Can anyone identify this older 55hp Johnson?

    Have one picture of an older Johnson 55hp motor.....can anyone ID it? Thanks! It's on this boat, year unknown.........
  13. Cannondale

    1991 70hp voltage regulator fun! Working wonky...........

    OK. History: (1991C 70 HP Force) Had stator, old black Merc 9A model, begin to fail, necessitating replacement. So, decided to upgrade the elect. system to the Merc Red 16A stator. This required replacing the voltage regulator as the old rectifier wouldn't handle the new stator. Found a...
  14. Cannondale

    1991 Force 70hp surging above idle.

    I've got a 1991 Force 70hp motor mounted on my 1990 Quantum 1600 X/B. It starts easily and idles well, but when pushed above idle, it begins to surge....rpms swing withn a 200-400 range when held at a steady rpm. What I've done to it so far......upgraded stator to the Mercury Red 16A using the...
  15. Cannondale

    Do voltage regulator brands matter? Like on Mercury outboards?

    Got told by a local Mercury dealer it does. He said for electrical repairs on Johnson/Evinrude outboards, he'll use any aftermarket brand available and will buy by price if requested by the customer. He'll use OEM Johnson/Evinrude, but has no qualms about aftermarket on them. But for...
  16. Cannondale

    Royal Purple Max-Gear lube....anyone ever used it in their Mercury lower unit?

    I've seen Royal Purple being recommended as an alternative to Quicksilver Hi Perf gear lube. RP says it's applicable for marine use for lower units using GL-4/GL-5 lubes, and from what I've found, Quicksilver Hi Perf lube is a GL-5 lube. Has anyone ever used it and did it work?
  17. Cannondale

    Converting from rectifier to voltage regulator....strange brands I've noticed.

    I'm upgrading my 1991 Force 70hp motor from the stock 9A stator to the newer 16A stator. (Had to...old stator died, so saw this as an opportunity.) Found a new Mercury red stator upgrade kit on ebay for $78, well below the retail price....comes with stator and adapter module. But I need to...
  18. Cannondale

    Pennzoil XLF TCW-3 oil....

    Bass Pro Shops has gallons of Pennzoil XLF synth blend TCW-3 oil on sale for $12.97/gal. Seems to be a darned good price. Thoughts?
  19. Cannondale

    Really stupid question...positioning of thrust washer, '91 Force 70hp

    OK, so I made the classic mistake and didn't write down, notate how the thrust washer faced on the prop shaft when I removed the old prop two months ago from my '91 70hp Force. So, new prop and new thrust washer ready to install....but which way should the thrust washer face? Beveled side...
  20. Cannondale

    I need a new prop.....anyone have experience/thoughts on Turning Point Hustler props?

    I need to replace the prop on my 70hp Force. I've found a brand new Turning Point Hustler prop w/hub kit for $63 shipped, which is about half the price of a Quicksilver prop of the same diameter and pitch. Anyone ever use one or have thoughts about the Hustler props? Worth the money in this...
Top