Search results

  1. B

    Need advice on the sale of a Merc 470 inboard.

    I have a Merc 470 inboard in our old shrimp boat, it was only 3 years old when last used, but has been sitting in the boat since 1992. I've cranked it once a year and someone now wants to buy just the engine not the outdrive. Any idea on how much the engine is worth selling for? The guy has the...
  2. B

    Go up in pitch?

    Boat: 16ft Hydra-sports Z-260 Motor: Johnson 115 JPLEEM V4 Eagle 60* Gear Ratio: I believe 2.0 Prop: 20 Pitch Raker Speed: 54.5mph GPS and speedo. Setup: 6-inch plate, shaft 4in. below transom Slip: apparently .015 according to calculator, not sure if its possible RPM: Has to be near 5800 at...
  3. B

    1999 Johnson 115hp yeann...blahh...yeannnnnn..blahh. Yeah, she's missing.

    The motor starts and idles perfect even though it seems to be getting a little more difficult each time out. I cleaned the carbs, drained the gas for any sign of water, pumped the bulb while running, changed the gear oil, and cleaned all connectors and fuses. Also thought it might have been the...
  4. B

    Testing System Check Tac, Help

    1) I'm trying to set my boat up correctly, but I believe my tac must be reading wrong. How do I check to make sure it is the Tac? Do I just check the gray wire from the rectifier for a 12volt reading, or do i need to check the resistance? It reads normal most of the time, but jumps a 1000 or...
  5. B

    Anyone familiar with Predator Bass Boats?

    I'm thinking about taking on a project boat, it is a 16ft Predator bass boat with a 1990 90hp Mariner with 200hrs freshwater run time. Owner wants $1800 for boat, motor, and trailer. Anyone know anything about these boats, flaws , durability, etc. Fair price? Think I should take it on?<br /><br...
  6. B

    Will this Lower-unit fit my 70hp Merc?

    I have been struggling to find a good used lower-unit to put on my 1989 70hp Mercury outboard. A guy has a 1996 75hp Force with a bad cylinder. Will the lower-unit form this motor fit my engine. The style and housing is similiar to those of current model Mercury's. It would be a steal for...
  7. B

    The Verdict- Why my inline went out after two trips?

    I recently rebuilt my 1978 90hp inline 6. The first time I took it to the water it ran as good as new, but the second trip she completely died out.<br /><br />I tore the powerhead down today and found number 2,3, and 4 piston scuffed. It looked like excess heat on these cylinders caused the...
  8. B

    Mercury Parts in Florida?

    Looking for information on any Mercury outboard parts dealers around Orlando or in the pan-handle of Florida. Doing a rebuild of an old inline 90 hp and need to pick up some rings and a few gaskets. I see many online stores, but would like to go pick them up myself without having to order them...
  9. B

    1976 Outta style!

    I've been running my 1976 15ft Hydra-sport:Hydra-Flight forever and it would still be going until my motor threw a rod. Anyone know of someone else who owns such a boat, I have never seen one like mine down here in Louisiana and can't find a single picture of one on the web? 30 years old and...
  10. B

    90hp Inline still trying to get him going

    I need some advice Clams, Laddies, anybody. I've made a few post about my trials with getting this 1974 90hp inline 6 on the water. Well here is where I'm at: I rewired the entire motor, cleaned carbs, replaced fuel lines, and changed the needle and seats in all 3 carbs. First had a problem...
  11. B

    90hp Inline 6-Surging wide open when started.

    I pulled this 90 out of storage and have been workig on it for a few months now. I came to crank it up for the first time last week and it immediately cranked and reved constantly wide open until I killed it. Then cranked it again with same result wide open, not even close to idle. Pulled the...
  12. B

    90 inline turns over slowly.

    Just pulled this 1974 engine out of storage to revive it our the past few weeks. I came to crank it yesterday and with a brand new battery the motor only turns over slowly. Is this a problem with the starter possibly. A week ago I had the plugs out and it turned over rapidly like normal. But...
  13. B

    Niagra Falls pouring out of 1994 60hp Mercury

    Loss pressure out the tell tale so I changed the water pump in a 1994 60hp Merc. Had a little more pressure coming out the pee-hole afterwards, so I decided to take it out for a run. I immediately noticed that once under way water was just pouring out from below the powerhead somewhere towards...
  14. B

    Any ideas why it Blew.

    WOT down a canal on the way back from a days fishing, then "pop,boom,blah,blam,crack,conk." This was the sound of my 1976 85hp last day running. This motor was in excellent condition and well maintained. The number 2 cylinders rod cracked in half then rotated 360 cutting up the power head...
  15. B

    90hp "Tower of Power" Timing

    I think I have it down pact, but to make sure the timing on my 1977 90hp inline is right before I try to crank her up for the first time I figured I'd make sure. <br /><br />Initially just align the distributor pulley arrow with the BTDC mark on the flywheel, then install the belt.......? Manual...
  16. B

    Help!

    Bought this motor and during first test realized reverse wouldn't engage. To fully engage reverse the cable position had to be at the very back of the slide the cable rides and forward at the front tip of the slide.( not enough cable adjustment for that). Pulled the lower-unit and adjusted the...
  17. B

    70hp Mercury 1988 Shift Positions

    Bought this motor and during first test realized reverse wouldn't engage. To fully engage reverse the cable position had to be at the very back of the slide and forward at the front tip of the slide.( not enough cable adjustment for that). Pulled the lower-unit and adjusted the shift shaft...
  18. B

    1989 Mercury 70hp Shifting and Shocking

    I just purchased a used 1989 Mercury 70hp outboard and have one, what I hope is a minor problem. The previous owner said that $400 was just recently put into the lower unit. I purchased it for $800, is that a good deal? It runs great and is sure better and quieter than my 850 that threw a rod...
  19. B

    1986 Mercury 70hp

    I purchased a 70hp 3cylinder Merc today to upgrade from my owl 1976 85, and ran into some wiring mind games. On the motor their are three solenoids (Top, Middle, and Bottom) located next to the powerpack. Anyone with a similiar motor knows where the blu/white, green/white, and black trim wires...
  20. B

    Ouch!!! That Rude just shocked me.

    My Uncle has a 1977 70hp Evinrude that seriously shocked him through the control box. He said he changed the old power pack because it wouldn't kill the motor, ever since when it rains or if he touches the water he gets shocked through the control box, that almost knocked him off his feet. Is...
Top