Search results

  1. J

    Keel Repair Product Advice

    Re: Keel Repair Product Advice Pics of the finished product! Thanks again for all the help, truely appreciate it!
  2. J

    Keel Repair Product Advice

    Re: Keel Repair Product Advice Finished late last night, will take pics of it with wax today hopefully after I buff it out. Attached are the pics after using 1000 grit sandpaper. From best I can tell, it looks decent, not professional. Still looks better than beforehand. The small...
  3. J

    Keel Repair Product Advice

    Re: Keel Repair Product Advice 320 grit is complete. Now waiting for the rain to stop so I can finish the 400 grit. Yacht Dr., you're probably right about trying to get ALL the scratches out, but I have already gotten most of them. When I start with the 600 grit, I am going to start sanding...
  4. J

    Keel Repair Product Advice

    Re: Keel Repair Product Advice Chriscraft254, I was thinking along the same lines as you (letting it dry overnight). I did however decide to go ahead and sand the high spots/ridges with 220 grit sandpaper. I used a brush to apply the gel. I don't mind if you bust my chops on how great...
  5. J

    Keel Repair Product Advice

    Re: Keel Repair Product Advice 3rd coat with wax is on and no sanding in between. Now how long before I can start the extremely long sanding process I have ahead of me? Thanks everyone for the tips and help, no way I could have done this even remotely right without you!
  6. J

    Keel Repair Product Advice

    Re: Keel Repair Product Advice 2nd coat applied! Question, I am going to apply the 3rdgel coat with wax, should I sand down some before adding the third coat since it us so uneven so the last coat will actually be on the outside layer when done. I know oops said all 3 layers but probably...
  7. J

    Keel Repair Product Advice

    Re: Keel Repair Product Advice 1st coat after basically starting over. About to apply a 2nd coat in a little bit.
  8. J

    Keel Repair Product Advice

    Re: Keel Repair Product Advice Sanded down to get all layers even on old gel coat with 100the grit sandpaper. Next I wiped down really good with acetone to remove all sanding residue. Then mixed 5 oz. of gel mixed with 5 drops of catalyst and 5 drops of surface seal. Applied with a brush...
  9. J

    Keel Repair Product Advice

    Re: Keel Repair Product Advice This shows the 2 rear bunks that are on the outside of the 2 center ones. These are 6' long, and center ones are 9' long.
  10. J

    Keel Repair Product Advice

    Re: Keel Repair Product Advice This pic you can see the 22 center supports that start about 3'the from back and run up towards the front, and you can see the roller. I forgot I had these on my phone.
  11. J

    Keel Repair Product Advice

    I need a little help deciding what I need to order to fix my problem with my keel, I bought this boat and removed a really worn down Keel guard to find this. I need to know specific products and quantities so I can get them on order really soon. Let me start off by saying that I have read...
Top